BATTERY PACK PRICES CITED BELOW $100/KWH FOR THE FIRST TIME IN 2020, WHILE MARKET AVERAGE SITS AT $137/KWH

BloombergNEF’s annual battery price survey finds prices fell 13% from 2019

Hong Kong and London, December 16, 2020 - Lithium-ion battery pack prices, which were above $1,100 per kilowatt-hour in 2010, have fallen 89% in real terms to $137/kWh in 2020. By 2023, average prices will be close to $100/kWh, according to the latest forecast from research company BloombergNEF (BNEF).


For the first time, battery pack prices of less than $100/kWh have been reported. These were for batteries in e-buses in China. While these were the lowest reported price, the volume-weighted average price for e-buses in China was slightly higher, $105/kWh.

Battery electric vehicle (BEV) pack prices are $126/kWh on a volume-weighted average basis. At the cell level, average BEV prices were just $100/kWh. This indicates that on average, the battery pack portion of the total price accounts for 21%.

BNEF's 2020 Battery Price Survey, which considers passenger EVs, e-buses, commercial EVs and stationary storage, predicts that by 2023 average pack prices will be $101/kWh. It is at around this price point that automakers should be able to produce and sell mass market EVs at the same price (and with the same margin) as comparable internal combustion vehicles in some markets. This assumes no subsidies are available, but actual pricing strategies will vary by automaker and geography.

Price reductions in 2020 are thanks to increasing order sizes, growth in BEV sales and the introduction of new pack designs. New cathode chemistries and falling manufacturing costs will drive prices down in the near term. The prices of cathode materials have fallen since reaching a high in spring 2018, finding a more stable level during 2020.

James Frith, BNEF's head of energy storage research and lead author of the report, said: "It is a historic milestone to see pack prices of less than $100/kWh reported. Within just a few years we will see the average price in the industry pass this point. What's more, our analysis shows that even if prices for raw materials were to return to the highs seen in 2018, it would only delay average prices reaching $100/kWh by two years - rather than completely derailing the industry. The industry is becoming increasingly resilient to changing raw material prices, with leading battery manufacturers moving up the value chain and investing in cathode production or even mines."

Leading battery manufacturers are now enjoying gross margins of up to 20% and their plants are operating at utilization rates over 85%. Maintaining high utilization rates is key to reducing cell and pack prices. If utilization rates are low, then equipment and building depreciation costs are spread over fewer kilowatt-hours of manufactured cells.

Daixin Li, a senior energy storage associate at BNEF, added: "The increasingly diversified chemistries used in the market result in a wide range of prices. Battery manufacturers are racing to mass-produce higher energy-density batteries with some new chemistries such as lithium nickel manganese cobalt oxide - NMC (9.5.5) - and lithium nickel manganese cobalt aluminum oxide - NMCA - set to be mass-produced as early as 2021. Lithium iron phosphate - LFP - however plays as a cost-competitive alternative, contributing to the lowest reported cell prices of $80/kWh."

The path to achieving $101/kWh by 2023 looks clear, even if there will undoubtedly be hiccups, such as commodity price increases, along the way. There is much less certainty on how the industry will reduce prices even further from $100/kWh down to our expectation of $58/kWh by 2030. This is not because it is impossible but rather that there are several options and paths that could be taken.

One possible route to achieving these lower prices is the adoption of solid-state batteries. BloombergNEF expects that these cells could be manufactured at 40% of the cost of current lithium-ion batteries, when produced at scale. These reductions would come from savings in the bill of materials and in the cost of production, equipment, and the adoption of new high-energy density cathodes. In order to realize these reduced prices, the supply chain for key materials, such as solid electrolytes, not used in lithium-ion batteries today, needs to be established.

Featured Product

SolarEdge Technologies - EV Charging Single Phase Inverter

SolarEdge Technologies - EV Charging Single Phase Inverter

The SolarEdge PV inverter combines sophisticated digital control technology with efficient power SolarEdge's EV charging single phase inverter offers homeowners the ability to charge electric vehicles up to six times faster than a standard Level 1 charger through an innovative solar boost mode that utilizes grid and PV charging simultaneously. This product is the world's first EV charger with an integrated PV inverter. Reducing the hassle of installing separately a standalone EV charger and a PV inverter, the EV charging inverter eliminates the need for additional wiring, conduit and a breaker installation. By installing an EV charger that is integrated with an inverter, no additional dedicated circuit breaker is needed, saving space and ruling out a potential upgrade to the main distribution panel. Whether you own an EV now or just want to be EV-ready, future-proof your home with SolarEdge.