Small Wind Electric Systems: Reducing Electricity Use and Costs

Small wind electric systems can make a significant contribution to our nation's energy needs. Although wind turbines large enough to provide a significant portion of the electricity needed by the average U.S. home generally require one acre of property or more, approximately 21 million U.S. homes are built on one-acre and larger sites, and 24% of the U.S. population lives in rural areas.

If you have enough wind resource in your area and the situation is right, small wind electric systems are one of the most cost-effective home-based renewable energy systems -- with zero emissions and pollution.


Small wind electric systems can:

- Lower your electricity bills by 50%-90%

- Help you avoid the high costs of having utility power lines extended to a remote location

- Help uninterruptible power supplies ride through extended utility outages.

- Small wind electric systems can also be used for a variety of other applications, including water pumping on farms and ranches.

Our pages on planning for a small wind electric system, and on installing and maintaining a small wind electric system have more information.

Ask here for more details@ Call: USA - +1 9197 992 333 | Email: sales@precedenceresearch.com

How a Small Wind Electric System Works

Wind is created by the unequal heating of Earth's surface by the sun. Wind turbines convert the kinetic energy in wind into clean electricity. When the wind spins the wind turbine's blades, a rotor captures the kinetic energy of the wind and converts it into rotary motion to drive the generator. Our wind power animation has more information about how wind systems work and the benefits they provide.

A small wind system can be connected to the electric grid through your power provider or it can stand alone (off-grid). This makes small wind electric systems a good choice for rural areas that are not already connected to the electric grid.

Small Wind Electric System Components

A wind electric system is made up of a wind turbine mounted on a tower to provide better access to stronger winds. In addition to the turbine and tower, small wind electric systems also require balance-of-system components.

Turbines

Most small wind turbines manufactured today are horizontal-axis, upwind machines that have two or three blades. These blades are usually made of a composite material, such as fiberglass.

The turbine's frame is the structure onto which the rotor, generator, and tail are attached. The amount of energy a turbine will produce is determined primarily by the diameter of its rotor. The diameter of the rotor defines its "swept area," or the quantity of wind intercepted by the turbine. The tail keeps the turbine facing into the wind.

Towers

Because wind speeds increase with height, a small wind turbine is mounted on a tower. In general, the higher the tower, the more power the wind system can produce.

Most turbine manufacturers provide wind energy system packages that include towers. There are two basic types of towers: self-supporting (free-standing) and guyed (supported with wires). There are also tilt-down versions of each tower type.

While tilt-down towers are more expensive, they offer an easy way to perform maintenance. Tilt-down towers can also be lowered to the ground during hazardous weather such as hurricanes.

Balance of System Components

The balance-of-system parts you'll need for a small wind electric system -- those in addition to the wind turbine and the tower -- will depend on your application. For example, the parts required for a water pumping system will be much different from what you need for a residential application.

The balance-of-system parts required will also depend on whether your system is grid-connected, stand-alone, or hybrid.

Manufacturers and installers can provide you with a system package that includes all the parts you need for your particular application. For a residential grid-connected application, the balance-of-system parts may include the following:

- A controller

- Storage batteries

- An inverter (power conditioning unit)

- Wiring

- Electrical disconnect switch

- Grounding system

- Foundation for the tower.

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.