Northwest Energy Innovations Launches Wave Energy Device in Hawai'i

First Grid Connected Wave Energy Device in the U.S. to be Independently Evaluated

Honolulu, Hawai'i June 09, 2015

After a several months of preparation, Northwest Energy Innovations (NWEI) has successfully deployed its Azura wave energy device at the United States Navys Wave Energy Test Site (WETS) near Kaneohe Bay, Oahu, Hawaii. The device will be deployed for 12 months of grid-connected testing as part of a rigorous program to commercialize the Azura technology.

"As the first grid connected wave energy device in the U.S. that will be tested and validated by an independent party, this deployment marks a major milestone for our team and the marine renewable energy industry," said NWEI Founder and CEO Steve Kopf. "A special thanks to Sea Engineering, our deployment contractor, for their tireless efforts in completing the assembly, launch, and installation of the Azura at WETS," Kopf added.

Deployment and testing of the Azura at WETS is supported by the U.S Department of Energy, the U.S. Navy, and the University of Hawaii. The University of Hawaii is responsible for data collection, analysis, and reporting as a means of independently validating the technology performance. The data will also be delivered to the U.S. Department of Energy and the U.S. Navy for their use in ongoing efforts to validate wave energy technology and advance marine renewable energy in the U.S.

"Standards, rigorous testing, and transparency are the foundations of our development program for the Azura technology. We believe that independent verification of performance data is imperative to achieving commercialization," Kopf added.

This pilot project builds on NWEIs deployment of a prototype at the Northwest National Marine Renewable Energy Centers test site off the coast of Oregon in 2012. The 2012 deployment was also supported by the U.S. Department of Energy, and NWEI applied experience gained from that testing to refine the Azura design, with a focus on optimizing the technologys LCOE through increased power output and improved durability, maintainability, and survivability.

Development of the Azura technology is a collaborative effort between NWEI, Callaghan Innovation, and Energy Hydraulics Ltd (EHL). Callaghan Innovation led the conceptualization and early development of the technology in New Zealand, and NWEI recently secured a global exclusive technology license from Callaghan Innovation to commercialize the Azura technology. EHL plays a critical role in advancing the technology and is responsible for the engineering, fabrication, and testing of the power conversion system.

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.