DreamWeaver Gold™ Separator is designed for improved safety in large format lithium ion batteries
DreamWeaver Gold™ battery separator combines microfibers and nanofibers in a highly porous substrate that has very high temperature stability without significant thermal shrinkage--up to 300 C.
Mercantile Development, Inc. Goes Green with Rooftop Solar Project
Solar System Highlights Commitment to Environmental Sustainability
Meteodyn, expert in Wind energy, opens new office in India
Sales, technical support, software training especially for Indian wind energy market. Meteodyn India office has opened since the 1st of February and is located in Pune, near Mumbai.
Strategic Carbon Founder Leads New Zealand Climate Change Expedition
Strategic Carbon LLC, a global science-based energy and environmental consulting and development enterprise, has announced that Strategic Carbon Founder Dr. Richard Coffin is leading an expedition to explore methane contributions to climate change
UConn Professor's Patented Technique Key to New Solar Power Technology
A novel fabrication technique developed by UConn engineering professor Brian Willis could provide the breakthrough technology scientists have been looking for to vastly improve today’s solar energy systems.
The potential breakthrough lies in a novel fabrication process called selective area atomic layer deposition (ALD) that was developed by Willis, an associate professor of chemical, materials, and biomolecular engineering and the previous director of UConn’s Chemical Engineering Program. Willis joined UConn in 2008 as part of an eminent faculty hiring initiative that brought an elite team of leaders in sustainable energy technology to the University. Willis developed the ALD process while teaching at the University of Delaware, and patented the technique in 2011.
It is through atomic layer deposition that scientists can finally fabricate a working rectenna device. In a rectenna device, one of the two interior electrodes must have a sharp tip, similar to the point of a triangle. The secret is getting the tip of that electrode within one or two nanometers of the opposite electrode, something similar to holding the point of a needle to the plane of a wall. Before the advent of ALD, existing lithographic fabrication techniques had been unable to create such a small space within a working electrical diode. Using sophisticated electronic equipment such as electron guns, the closest scientists could get was about 10 times the required separation. Through atomic layer deposition, Willis has shown he is able to precisely coat the tip of the rectenna with layers of individual copper atoms until a gap of about 1.5 nanometers is achieved. The process is self-limiting and stops at 1.5 nanometer separation.
Webinar – CSP cost and feasibility in the MENA region
As the concentrated solar power industry turns its attention to the Middle East and North Africa, CSP Today is hosting a webinar to discuss the opportunities on 12 February 2013.
Dow Supports Solar Energy Generation in South Africa
Johannesburg, South Africa — February 4, 2013
INFLUENTIAL SPEAKERS AND AN INVALUABLE FEATURE ANNOUNCED AT ALL-ENERGY 2013
With 16 weeks before the opening of All-Energy 2013, the UK's largest renewable energy exhibition and conference, key component parts are all in place. Some of the influential speakers taking part in the multi-stream conference have been announced, as has a new and invaluable feature - The Energy Hu
KIER-Edu.com: Preparing For A Career in Oil and Gas industry
The ever increasing demand of petroleum products and the shortage of qualified professionals make the oil and gas industry a very interesting sector to break into.
Statement from SEIA President and CEO Rhone Resch on the Notice of the Departure of Energy Secretary Steven Chu:
SEIA applauds Secretary Chu for his outstanding leadership of the Department of Energy and for his work to foster the growth of clean energy technologies to power America.
IKEA Plugs-in South Florida's Largest Solar Energy System and Becomes State's Largest Non-Utility Solar Owner, as Company Reaches 80% Solar Presence on Its U.S. Locations
This installation represents the 35th completed solar project for IKEA in the U.S.
EDF EN Canada Obtains Authorization from the Government of Quebec and Confirms Turbine Order
Rivière-du-Moulin Wind Project will be the largest wind energy facility in Canada with a single Power Purchase Agreement when commissioned.
First Solar Acquires 50 MWAC Macho Springs Project from Element Power Solar
It will be the state's largest solar power project
U.S. Trading Company Cuts Energy Costs With Vista Solar
In December 2012, Vista Solar installed a 259 kW solar system for U.S. Trading Company, and the system is set to save the company almost $3.5 million in utility costs in the coming years.
#SOLARCHAT LIVE TWEETUP TO BE HELD AT PV AMERICA EAST CONFERENCE
Popular Twitter Chat Presented Live for Solar Industry Professionals,
With Fundraiser Benefitting the Heather Andrews Scholarship Fund
Records 14746 to 14760 of 26133
First | Previous | Next | Last
Solar & Wind - Featured Product
Solar FlexRack - TDP 2.0 Solar Tracker with BalanceTrac
Solar FlexRack's latest solar tracker technology bundles an advanced tracker design with a full team of seasoned engineering and installation experts at your service. The next-generation solar tracker delivers a package of features that both enable increased energy yields for commercial and utility-scale solar installations, and significantly reduce project risks. That translates to smart installation cost-savings across your project budget.
