Anderson Power Products® Introduces SPEC Pak™ High Power Connector

Anderson Power Products® (APP®), a leader in high power interconnect solutions, is proud to introduce the SPEC Pak™ High Power Connector, APP's latest addition to the SPEC Pak™ Connector series of sealed power for environmental conditions.

Hypersonic passenger jet to run on clean fuel is unveiled at Paris Air Show

Super-fast speed — think Tokyo to L.A. in 2 1/2 hours — isn't the only cool feature of the Zero Emission Hyper Sonic Transport proposed by EADS. At the Paris Air Show this week, the aircraft manufacturer and Airbus parent revealed its proposed passenger aircraft, which would be run on, among other sources, liquid hydrogen and biofuel. The aircraft, which EADS said could be standard by 2050, would cruise at Mach 4 speeds nearly 20 miles high — inside the Earth's atmosphere. Demonstration technologies could be ready by the end of this decade. Companies at the Paris show were buzzing about clean-fuel options. Airbus and Parker Aerospace said they would look into fuel-cell technology that converts hydrogen and oxygen into electricity and creates water as exhaust. The pair said that flight tests could happen by mid-decade. The Air Transport Assn. of America, the industry trade group, said a slew of member airlines signed letters of intent to partner with Solena Group. The company produces its GreenSky California fuel from biomass at a Santa Clara County facility.

Southwest Windpower Personal Wind Systems Available for Purchase at Select Home Depot® Locations

Skystream install program helps consumers take advantage of their wind resource

SGS showcases Carbon Footprint Assessment at the PCF World Summit

SGS sponsored the 5th PCF World Summit, April 7–8, 2011 in Zurich, Switzerland. Held at the Gottlieb Duttweiler Institute, the forum provided an opportunity to share practical experience and knowledge about climate-conscious consumption and production.

Schletter Inc. Selected by SOLON Corporation for 15 MW Solar PV Ground Mount Installation

SOLON Corporation selects Schletter Inc. as supplier for a 15 MW (AC) ground mount solar installation in California.

Phono Solar to reveal new strategy at Intersolar San Francisco, Booth 8357

The innovative group continues to manufacture cutting-edge tools which will be on display at Intersolar San Francisco

Small Wind Turbine Pioneer Breaks 100,000 Kilowatt Barrier

Farm stables and stud owner Malcolm Bronte-Stewart has become the first Gaia-Wind turbine owner in the UK to generate more than 100kW of energy.

Examining the emerging markets in the CSP industry

The CSP Today latest report CSP Markets Report: New Edition (2011-2012), offers the opportunity to identify and define the real opportunities in the worldwide CSP markets.

Tension Test of Powerway Solar Mounting System

The tensile strength, yield strength and percentage elongation after fracture of Powerway solar mounting system all surpassed standard levels.

New technology converts exhaust heat into cooling, electricity

It sounds a little counterintuitive, but the wasted heat from automobile tailpipe emissions could one day be used to cool and power your car. Researchers from Oregon State University developed a thermally activated cooling system that harnesses the energy in waste heat produced by cars, factories, and power plants, and converts it to cooling. The system works by combining a vapor compression cooling cycle with an "organic Rankine cycle," an existing energy conversion technology, to convert waste heat from a thermal source to generate power and cooling. By turning 80 percent of every kilowatt of waste heat into a kilowatt of cooling capability, the system recycles exhaust heat that would otherwise escape into the atmosphere. The cooling system could be used to ventilate electronics systems that also require energy-intensive air conditioning to keep cool. The energy-recycling technology could also be used in vehicles to help power hybrid cars. Although less efficient than converting exhaust to cooling, the prototype can also be used to produce electricity to propel a vehicle. Only 15 to 20 percent of the waste heat can be converted to produce electricity, but it's better than letting the energy go to waste.

Christopher Associates to Exhibit A Range of New Solar Technologies at Intersolar North America 2011

Christopher's engineering and sales team will be on hand with supplier engineers to demonstrate technology and answer customer inquiries related to the new range of products.

Engineered Conductive Materials to Exhibit Stringer Attach Adhesives at Intersolar North America 11

Company representatives will be available to discuss the full line of conductive stringer attach adhesives, conductive adhesives for back contact crystalline silicon, thin-film and via fill applications, as well as conductive grid inks for photovoltaic applications.

Bentek Solar to Debut New Product Line at Intersolar North America 2011

Company representatives will be available to discuss Bentek Solar's full line of Circuit Breaker Re-combiners, Multiple Disconnect Safety Systems (MDSS) and Circuit Breaker Safety Systems (CBSS).

AREVA Solar Part of Consortium Selected for New Australian 250MW Solar Flagship Project

Solar Thermal/Gas Hybrid Power Project will be Largest Plant of its Kind in the World

Intersolar 2011 - DEGERenergie: Interest in producing solar energy for own consumption is increasing

Horb a.N., 20 June 2011. DEGERenergie is reporting big success at the industry's leading trade fair, Intersolar 2011 in Munich. Particularly smaller and medium-sized businesses showed a growing interest in the company's MLD technology, with the goal of producing solar energy for their own use.

Records 16921 to 16935 of 23723

First | Previous | Next | Last

Solar & Wind - Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.