Solar3D, Inc. is developing a breakthrough 3-dimensional solar cell technology to maximize the conversion of sunlight into electricity. Up to 30% of incident sunlight is currently reflected off the surface of conventional solar cells, and more is lost inside the solar cell materials. Inspired by light management techniques used in fiber optic devices, Solar3D's innovative solar cell technology utilizes a 3-dimensional design to trap sunlight inside micro-photovoltaic structures where photons bounce around until they are converted into electrons
Starting in a two-room office in 1977, Christopher Associates quickly expanded by focusing on technical service and an international product mix. By 1984, the company grew to become one of the leading suppliers to the printed circuit industry. Today, its customer base includes more than 1,200 companies worldwide in the Printed Circuit Fabrication and Assembly industries.
Krayden, Inc. offers numerous solutions for the solar energy industry. As an authorized distributor of leading manufacturers serving the photovoltaic market, including Dow Corning, Henkel Loctite, 3M, Humiseal, FCT Assembly, Lord, and Cytec, and others the company is able to supply a full line of coatings, tapes, PV sealants, conductive Inks, PV adhesives, lead-free solder, and PV potting agents. Here we catch up with Wayne Wagner, Krayden, Inc.'s president, to see how the company's PV side of the business is growing.
Solar Insure is a California owned Independent insurance brokerage dedicated to providing our clients with the highest quality professional risk management & insurance services, while delivering competitively priced alternative energy insurance products.
Brent Harris, P.Eng, is CTO of Sustainable Energy Technologies, and a co-founder of the company. He led the development and commercialization of the company's technologies, from early demonstrations to the launch of its latest Sunergy inverters. Mr. Harris has a passion for decentralized energy in general and for solar power in particular. He is an active proponent of changes to the management and regulation of our electric system that will enable greater adoption of decentralized and renewable energy technologies. Mr. Harris is a member of the board and treasurer of WADE Canada, and was a member of the board of directors of the Canadian Solar Industries Association from 2005-2008.
SolarBOS was the first company to build a combiner box around a flexible platform where the system integrator could specify the number of fuses and enclosure rating. While this seems pretty simple in hindsight, back in 2004 this was brand new and allowed integrators a lot of flexibility on the design of the DC side of the project.
May 18th & 19th saw the renewables sector come together for the annual All-Energy conference and exhibition in Aberdeen. While developers, manufacturers, enterprise agencies and financiers debated and endorsed the industry's progress in Scotland and pondered on the development of the offshore wind supply chain, the Scottish European Green Energy Centre (SEGEC) felt it prudent to remind delegates that many of the current business models won't deliver the project investment needed in the future.
The end of 2010 saw an accumulated volume of approximately 740 MW in Belgium, enabling the country to establish its 5th position in the EU ranks, before France. 88% of capacity is in Flanders. While Hernieuws and VREG data totalled up to 385 MW for Belgium in 2009, EurObserv'ER recently counted 363 MWp DC capacity. Based on the original AC data, 2010 could have seen growth of 354 MW. With a population of 10,8 million, the country as a whole would have reached a level of 68 W of installed solar capacity per inhabitant (75 Wp DC).
Douglas Caldwell's AC micro grid for his home, is a sleek combination of Sanyo HIT solar panels, Enphase micro-inverters and a Schneider Electric Xantrex XW Series battery backup system, which provides uninterrupted power for occasions when the grid is down.
Here are a examples of Wind installations around the world. With an operational fleet spanning 60 countries and every continent Proven Energy's high performance wind turbines accrue over 30 million run hours annually.
Here are two case studies about SolarWall. NREL - Research Support Facility is pictured below and Northern Arizona University - Distance Learning Center
The Minneapolis Convention Center Solar Project was a collaborative effort between the City of Minneapolis, Xcel Energy, and Best Power Int'l, LLC.
The pressroom is a concrete building built in the late 1970's. The roof was old and flat. A traditional ballasted mounting system, with its added weight, wasn't an option-- the old roof would have collapsed. Mark Stahl the operations manager of Astralux Power needed a different kind of a solution.
Alice Springs, Australia, with around 300 days of sunshine every year, is an ideal test location for solar power installations. The Desert Knowledge Australia (DKA) Solar Centre is a government-funded public showcase of solar installations, demonstrating a range of solar power technologies from many of the world's leading manufacturers.
Mr. Deep Chakraborty currently CEO of Centrosolar America, Inc. since January 2010, was until recently Vice President of the parent Group in Munich, Germany. At Centrosolar, Deep has focused on a fast ramp-up of the US business: launching Centrosolar-branded products, growing the sales and engineering organization and launching a systems-based approach to Centrosolar's product offering in the North American market.
Records 22921 to 22935 of 24576
Solar & Wind - Featured Product
The SolarEdge PV inverter combines sophisticated digital control technology with efficient power SolarEdge's EV charging single phase inverter offers homeowners the ability to charge electric vehicles up to six times faster than a standard Level 1 charger through an innovative solar boost mode that utilizes grid and PV charging simultaneously. This product is the world's first EV charger with an integrated PV inverter. Reducing the hassle of installing separately a standalone EV charger and a PV inverter, the EV charging inverter eliminates the need for additional wiring, conduit and a breaker installation. By installing an EV charger that is integrated with an inverter, no additional dedicated circuit breaker is needed, saving space and ruling out a potential upgrade to the main distribution panel. Whether you own an EV now or just want to be EV-ready, future-proof your home with SolarEdge.