The owner’s goal was to construct a multi-purpose building that would also serve as a mounting platform for a 28.35 kilowatt PV solar system, which would provide 100% of the electricity needs for the entire equestrian ranch property.

Canadian Equestrian Multi-Purpose Barn – Case Study S-5-PVKIT® 2.0 & S-5! X-Gard™ 2.0
Canadian Equestrian Multi-Purpose Barn – Case Study S-5-PVKIT® 2.0 & S-5! X-Gard™ 2.0

Case Study from | S-5!

The Project

Bruce Goode, a retired cattle-ranch owner and airline pilot, recently downsized and purchased a small 8-acre equestrian estate with spectacular mountain and lake views of the Okanagan Valley area of British Columbia, Canada. The property features a new 3,500-square-foot, multi-purpose barn with a 24-gauge Cascadia Metals Black SMP Standing Seam Metal Roof.

The spacious main floor will be used as a workshop area with a tack room and riders’ lounge. The upper floor open loft area will be used as a “hunting lodge/cowboy shack” themed retreat and entertainment area complete with taxidermy mounts, in addition to a hobby/work area for gunsmithing and another area for exercising.

 

The Challenge  

The owner’s goal was to construct a multi-purpose building that would also serve as a mounting platform for a 28.35 kilowatt PV solar system, which would provide 100% of the electricity needs for the entire equestrian ranch property. He also needed a roof that would meet the expected 25-30+ year service life of the PV system. Because the barn is located in the northern hemisphere, he needed to orient the roof and the solar panels for maximum solar gain.

Additionally, the property is located within a forest interface area, so a building constructed of fire-resistant materials was preferable. Furthermore, he wanted to reduce the risk of sudden and unexpected release of snow on his new slick metal roof, potentially posing a serious threat to property and visiting guests below.

 

The Solution

The owner specified a standing seam metal roof for its sustainability and durability, since it is the only roof type with a service life that actually exceeds the service life of a solar PV system. This enables him to avoid potential costly disassembly of the PV array, re-roofing and re-assembly further down the road.

The ridgeline of the barn roof was oriented exactly due east/west, to afford maximum solar gain for the 90 solar panel system mounted on the south-facing upper roof and lower roof surfaces. 

The S-5-PVKIT® 2.0 solar solution (in black to match the black anodized PV frames) enabled solar installers to direct-attach PV modules to the standing seams, eliminating the need for a traditional rail mounting system and provided a simple, secure, economical and penetration-free method for attaching the solar modules.

Additionally, in the event of a nearby wildfire, a metal roof was chosen for its non-flammable, non-combustible properties, since it will not spark and ignite into flames during a wildfire or lightning strike, which also helps the owner save on insurance premiums.

S-5!’s X-Gard™ 2.0 snow retention pipe system was selected for its compatibility with the project's standing seam metal roof. It is mechanically attached with round-point setscrews, gripping the seam securely without penetration and without damage to the panels’ protective finishes.

 

Project Data:

Location: Vernon, British Columbia, Canada

Owner: Bruce Goode 

Architect: Timber frame engineering and design by Marcus Weiss and Daniel Kilchenmann of European Timberframe Corporation

General Contractor: Woodstyle Homes

Roofing Contractor: Artisan Roofing Ltd.

Roof Profile: 24-gauge Cascadia Metals Black SMP Standing Seam Metal Roof, 20" On Center, 1-1/2" high rib, from New Tech Machinery SSH, SS150

Solar installer: Roost Solar, Inc.

Module Manufacturer: Canadian Solar 315W mono-crystalline modules (CS3K-315MS)

Inverter Manufacturer: 3 SolarEdge HD Wave inverters 7600W each (SE7600H-US) and P340 (340W) optimizers under each panel

Solar Attachment Manufacturer: S-5!

Industry: Residential

 

Project Stats:

  • Project Size: 28.35 kilowatts of PV mounted using the S-5-PVKIT® 2.0 solar attachment solution and the S-5-S Mini clamp
  • Roof Measured: 6,000 square feet
  • Roof Pitch: 8/12 upper roof

 

S-5! Products Supplied:

  • X-Gard 2.0 (64 feet)
  • X-Gard 2.0 bracket (37) with X-Clip II (36)
  • S-5-S clamp (80)
  • S-5-PVKIT 2.0 in black (265 MidGrabs and EdgeGrabs)

 

“We’ve been using S-5! zero-penetration clamps on our solar projects successfully for years, and the release of the PVKIT 2.0 adds another S-5! product to our arsenal for standing seam metal roofs. Beyond the quality and ease of use we have come to expect from S-5!, the PVKIT’s rail-less design is what makes it a no-brainer for us. Not only do we avoid the shipping, and on-site handling and leveling of rails, but we are able to reduce our overall cost per watt through lower material cost and installation time as compared to a rail-based solution.” 
—Stephen Russell, Owner, Roost Solar, Canada

 

 

 

About S-5!
Since 1992, S-5! has been the leading authority on metal roof attachment solutions. S-5!’s zero-penetration clamps attach ancillary items to standing seam and conceal-fix metal roofs, while maintaining roof integrity and warranties. S-5! solutions are engineered for a variety of applications: snow retention, fall protection and wind performance systems, satellite dishes, solar arrays, signs/banners, light fixtures, stack/flue bracing, walkways, air conditioning, lightning protection, equipment screens, conduit, condensate lines and more. Made in the U.S.A., S-5!’s products have revolutionized the metal roofing industry and are now installed on more than 2 million metal roofs worldwide, including 2 GW of PV, providing strength and longevity never before seen.

 

The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag
S-5!

S-5!

In 1992, S-5! invented the very market space of manufactured roof attachment solutions. S-5!'s clamps and brackets are engineered for a variety of applications, including residential and commercial solar installations on exposed-fastened and standing seam metal roofing. The company has a portfolio of more than 5+ GigaWatts of rooftop solar arrays, including many Fed-Ex and Walmart buildings; 700 Costco stores in eight countries; international airports; and corporate headquarters for Google, IBM, NATO, NREL and Apple. S-5! Technologies are also affordable for domestic applications with more than 15,000 such solar installations in 50 countries.

Other Articles

Solar Atmospheres, Fontana, CA
By combining onsite generation, an advanced energy storage system and a world-class artificial intelligence-powered analytics platform, SCA optimizes energy usage by automatically switching between onsite generation, battery power and grid power.
Liberty Self Storage - American Flag Solar Array Case Study
In line with the name of the company “Liberty” and what it represents, they chose an American Flag solar panel array designed by The Next Energy Technology as a symbolic source of pride and unity for all Americans.
Ocean Reef Club at Key Largo―Case Study - RibBracket™III and S-5-PVKIT®2.0
The club is located on a private peninsula, bound on three sides by water and on the fourth side by federal and state lands. The area is subject to 180 mph, Category 5 hurricane winds, making installation of a low-profile, roof-mounted system essential.
More about S-5!

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

OMG Roofing Products  - PowerGrip Universal

OMG Roofing Products - PowerGrip Universal

Eliminate Solar Rack Ballast and Reduce Rooftop Material Handling. PowerGrip™ Universal (PGU) is a commercial roof mount system designed to secure solar racks and other equipment to any type of commercial roofing system. PGU provides a secure connection directly to the roof deck or structural members and is designed to reduce or eliminate ballast in solar racking systems, so there's less weight on the roof and less material handling. Made of heavy-duty cast aluminum, PGU units include a base ring which is secured through the roofing cover and into the structural roof deck, and a waterproof top plate.