Case Study - Western Reserve Wind Project
The leadership of Western Reserve Local Schools should be applauded for installing a wind project that allows them to be fiscally responsible, climatically aware and educationally adaptive.
AltEnergyMag Interview - Geothermal Heating and Cooling
ENRGi was formed to bring the energy and costs savings of geothermal heating and cooling to residential and commercial buildings in the northern New Jersey area. Unlike most contractors that can install this equipment, we focus solely on geothermal environmental controls. In addition to having certification from the IGSHPA (International Ground Source Heat Pump Association), ENRGi also hosts educational seminars on the benefits of geothermal technology for the public.
AltEnergyMag Interview -Thermal and Hybrid Solar Collectors
With the Volther Solar hybrid collector, production of both electricity and hot water is done simultaneously. In PV modules, as the module temperature increases, the efficiency of the module drops down. In hybrid modules, the module heat is absorbed in order to produce hot water. In this way, PV efficiency is optimized as the heat is transferred into water for hot water production.
Global Investments in Renewable Energy are expected to reach $653.35 billion by 2015
Technological innovations are underway to make these sources more affordable and efficient, which will result in their wider application. Thus, technological innovations and research and development activities for renewable energy are gathering momentum.
Is Lithium the new "Holy Grail" in Battery development?
So, what is so great about these batteries anyway? Well here are the "Pros" for Lithium & Lead Acid so you will understand where all this is going.
Solar Federal Buildings Program
Why aren't more Federal Buildings covered with solar panels?
Global Biodiesel Market Analysis and Forecasts to 2020
GlobalData's report, "Global Biodiesel Market Analysis and Forecasts to 2020", is an essential source of information and analysis on the global biodiesel market. This report gives an in-depth analysis of the global biodiesel market and provides forecasts up to 2020.
Renewable Energy Production from Tannery Wastes
The conventional leather tanning technology is highly polluting as it produces large amounts of organic and chemical pollutants. Wastes generated by the leather processing industries pose a major challenge to the environment. According to conservative estimates, about 600,000 tons per year of solid waste are generated worldwide by leather industry and approximately 40-50% of the hides are lost to shavings and trimmings. Everyday a huge quantity of solid waste, including trimmings of finished leather, shaving dusts, hair, fleshing, trimming of raw hides and skins, are being produced from the industries. Chromium, sulphur, oils and noxious gas (methane, ammonia, and hydrogen sulphide) are the elements of liquid, gas and solid waste of tannery industries.
Wind Power is Going to the Big City
From business to government to schools, wind power is creating new opportunities.
The Science of Solar: Solar Energy - The Basics
Solar is one of the most talked-about alternative energy sources in the world today. Enough energy comes from the sun in one hour to power the global population for a year. Even though the amount of sunlight varies around the world, sunlight is a totally renewable resource, unlike oil, coal and natural gas. As long as life exists on the earth, sunlight will play a role.
NanoPioneers Are Becoming the New Environmentalists
A new type of environmentalist is emerging, using nanotechnology based products as a way of reducing their impact on the environment and reducing their energy use in a variety of ways.
What Building Owners Need to Know Before Going Solar
If you are a building owner that is considering a solar panel installation, there are several questions you should ask before signing any contracts. What is the best mounting method for installation on my rooftop? Do I need a new warranty to protect myself from any damage? Which type of system will give me the best ROI? Do I work with my old roofing company or do I need to find a structural engineer?
Total Light Management To Save Energy
Altenergymag interview with Barry Kay, President of Kay + Sons, a national leader and expert in how light is managed in buildings of the future.
Sea Change: Recommendations For Offshore Wind Farms
Though North America lags Europe on the wind energy front, with less cumulative installed capacity despite a vast geographical size difference, growth is strong and has only scratched the surface. Huge potential, particularly, exists in offshore installations, which represent just a small percentage of global wind capacity to date. Ocean-based turbines, both floating and fixed, take advantage of powerful, more consistent wind speeds and a topography that doesn't obstruct wind flow.
What Size Air Conditioner Do I Need?
Many people mistakenly buy larger air
conditioning units than they need because they believe that a larger unit
will both operate and cool their house more efficiently. In truth, a larger
unit could be less efficient.
Records 2416 to 2430 of 3092
First | Previous | Next | Last
Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.
