Stäubli continues to expand its North American manufacturing of solar PV components
Supports increased demand for domestically made, high-quality connectors and wire harnesses, driven in part by the US Inflation Reduction Act
Winds Of Change For Vestas: 3D Printed Tooling Transforms Wind Turbines
There aren't a lot of technologies that can propel towering wind turbines to new heights of time and cost efficiencies, but large-format additive manufacturing rose to the challenge and delivered with its eclectic range of applications.
3D Printing Powers Wind Turbine Research At TU Berlin
On average, wind turbine blades are a massive 80 meters long. When it comes to reengineering these towering blades, no other technology offers the freedom, precision, and adaptability to scale parts quite like 3D printing.
Bringing India made Solar Panels to the US Market
The long-term vision for our company's presence in the US is to establish Gautam Solar as a trusted and reputable brand of solar panels. We want not only to export our panels from India, but also our brand which is synonymous with high-quality solar panels.
Solar Panel Energy Automation
An important part of any solar system is the ability to monitor electricity production in real time. Because panel output varies throughout the day, accurate and timely readings are essential for diagnosing problems and optimizing usage.
DOE funds 3D printing of wind blade tooling to make U.S. clean energy sector more competitive
The DOE-funded Purdue program, "Additive Manufacturing of Modular Tools with Integrated Heating for Large-Scale Wind Blade Manufacturing," is led by Eduardo Barocio, director of the Composites Additive Manufacturing and Simulation (CAMS) Industrial Consortium.
Enel Selects Oklahoma as Site for Planned Solace PV Cell & Panel Manufacturing Facility
.jpg)
The factory, which is expected to have an annual production capacity of 3 gigawatts (GW), represents an initial investment in excess of 1 billion USD and is anticipated to create around 1,000 new direct permanent jobs by 2025.
Photo Chemical Etching Gives Manufacturers the Edge in Electric Vehicle Production
Reduction of weight is an essential part of the EV revolution, a goal which can be achieved through etching, suitable applications including alkaline battery connectors and busbars.
LG Energy Solution and Honda Break Ground for New Joint Venture EV Battery Plant in Ohio
EV batteries from the facility, over 2 million sq. ft. in size, to be provided exclusively to Honda auto plants to produce EVs to be sold in North America
Qcells Invests $2.5 Billion in Building Complete Solar Supply Chain in U. S.
The company aims to have 8.4-gigawatt of solar panel production capacity by 2024 and hire 2,500 people in the clean-energy sector. It is the largest investment in U.S. solar history to build the nation's only complete and sustainable solar supply chain
Improving Energy Efficiency of EV Manufacturing
There are misleading oversimplifications concerning EVs all over the internet. Some state the production voids its entire environmental impact. Manufacturing EV parts uses fossil fuels like coal and oil, so does this outweigh the fact it won't use oil in its lifetime?
New variable DC power supply aids electrical testing
One-size-fits-all REOTRON power supply will help manufacturers overcome the challenges of manufacturing solar panels
Defect Detection in Photovoltaic Modules
Allied Vision provides Near-Infrared (NIR) cameras with great performance in terms of quantum efficiency and sensitivity for Photovoltaic (PV) modules inspection systems. They are used by inspection systems in the market to detect defects.
Hanwha pledges commitment to build a fully American solar supply chain
Hanwha Solutions to become the largest shareholder of Norway-based U.S. polysilicon manufacturer REC Silicon after acquiring an additional 4.67% stake from Aker Horizons, increasing total investment to $204 million and ownership share to 21.34%.
ESI Automotive Achieves 84 % Power Density Increase in EV Efficiency
The research by ESI Automotive and engineers of its customers, involved a series of real-world electric vehicle (EV) tests. The results clearly demonstrate the efficiency benefits of using silver sintering technology for inverter designs versus a soldered solution.
Records 16 to 30 of 41
First | Previous | Next | Last
Featured Product
MORNINGSTAR - ReadyEdge
The ReadyEdgeTM (RE-1) accessory is an intelligent system controlling and reporting device meant to make monitoring your solar energy system more transparent. Enabling access to LiveViewTM 2.0 and Morningstar Solar ConnectTM, ReadyEdge provides data from all compatible Morningstar devices in your system. It is designed to be paired with the three ReadyBlock options, up to six total, with the possibility to use multiple ReadyShunts and ReadyRelays. The ReadyEdge is compatible with select Morningstar products.
