Solar road in the Netherlands producing more energy than anticipated
A road made of solar panel material is producing more energy than the creators expected.
Engineers created a solar power bike path near Amsterdam that is over 200 feet long last year, and the road generated over 3,000kwh during the first six months, according to Al Jazeera, enough energy to power a house for a year.
The company that created the road, SolaRoad, claims that means the road can produce 70kwh per square meter per year. The road is made of solar panels, glass, rubber and concrete. The road can either power street lamps or add power to the general grid.
Over 150,000 cyclists have ridden on bike path without a problem since the project began. The path is made to be non-reflective and to prevent skidding.
SolaRoad is still refining its materials to make them even more weather proof and efficient, and the company hopes to expand to larger areas in the future.
Engineering a better solar cell: UW research pinpoints defects in popular perovskites
One of the fastest-growing areas of solar energy research is with materials called perovskites. These promising light harvesters could revolutionize the solar and electronics industries because they show potential to convert sunlight into electricity more efficiently and less expensively than today’s silicon-based semiconductors.
These superefficient crystal structures have taken the scientific community by storm in the past few years because they can be processed very inexpensively and can be used in applications ranging from solar cells to light-emitting diodes (LEDs) found in phones and computer monitors.
A new study published online April 30 in the journal Science by University of Washington and University of Oxford researchers demonstrates that perovskite materials, generally believed to be uniform in composition, actually contain flaws that can be engineered to improve solar devices even further. Cont'd...
Swedish solar energy expert Midsummer receives multi million USD order for a DUO thin film solar cell manufacturing system
Swedish solar energy expert Midsummer, a leading provider of equipment for cost-effective manufacturing of flexible CIGS thin film solar cells, has received an order for its compact DUO solar cell manufacturing system to an undisclosed customer.
PV Nano Cell Enters U.S. Market with Innovative Solar Cell Printing Technology
Sicrys silver and copper nano-metric digital inks dramatically reduce costs and increase efficiencies in solar cell manufacturing
Spray-on Solar Cells - How do they Work?
Spray-on solar cells use nanotechnology. These cells are made using quantum dots, which is a nanocrystal composed of a semiconductor material that is small enough to take advantage of the laws of quantum mechanics.
What is helium-3?
Will China Be The First To Mine Lunar Energy?
Harvesting Energy From Heat
In the United States, more than half of the energy we burn each year gets lost as heat instead of being put to use with most of the energy going out the exhaust pipe of a car or out the smokestack of a power plant.
The Echogen Power Systems Heat Engine
Waste Heat to Power (WHP) creates electricity by heating a fluid at high pressure, then expanding the fluid through a turbine to power an electric generator.
HEMOS Technology
Essentially, we're giving the solar panel a brain; the patented HEMOS chipset can be fitted in a typical junction of any solar panel. With it you can communicate directly with the panel and execute commands at the module level.
Latest Studies Open New Doors in Solar Power Utilization
With constant innovations hitting the frontiers of solar power research, two recent studies provide a glimpse of new opportunities in way we are harnessing this source of energy.
How Solar Is Improving The Boat Industry
If the shipping industry were a country, it would place sixth on the most carbon emission generating countries in the world. The good news is that solar in maritime transport is improving.
Plastic to Fuel Conversion: An Elegant Solution to Two Major Environmental Concerns
The process relies on heat and pressure to break down the long hydrogen, carbon and oxygen polymers that make up plastics. From there, these elements are recombined into the shorter hydrocarbon chains that can be effectively burned as diesel or gasoline.
2013 Nanotechnology Patent Literature Review
For nanotechnology patent literature as a whole, Energy Storage, Photovoltaics and Petroleum Exploration emerged as the top three areas of focus in the Energy sector, each with similar growth since the early 2000s.
An Uncertain Future for Quantum Computing?
Quantum computing is here to shake the existing mechanical, electrical and electronic systems. Modern electronics in particular will not be the same if quantum computing gains acceptance. There're voices of support as well as dissent. In this post, we'll analyze future trends in quantum computing. Keep reading!
VOTO - Charging Batteries in a Fire
One half of the VOTO is a fuel cell and the second half is a handle which has a light, cell phone adapter and nickel-metal hydride battery to store energy.
Records 226 to 240 of 323
First | Previous | Next | Last
Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.
