Transparent solar panels are 50 times more productive than regular photovoltaics
Luke Dormehl for DigitalTrends: As the term “regular windows” suggests, users don’t have to replace the existing windows in their home, but need only treat them with a special process developed by the company.
“We apply liquid coatings to glass and plastic surfaces at ambient pressure, and dry these coatings at low temperature to produce transparent films,” Conklin continued. “We repeat these processes, and then collectively these coatings — and thus the glass and plastic surfaces — generate electricity.”
Of these coatings, the most important is the so-called “Active Layer,” through which electricity is generated by the absorption of light, and the transparent conductors, which allow the electricity to be extracted. “[The] coatings are primarily organic, primarily from carbon, hydrogen, nitrogen, and oxygen,” Conklin said. “We are constantly refining each of the layers to improve on the power we’re able to extract from these coatings and enhance their manufacturability.” Cont'd...
Solar cell is more efficient, costs less than its counterparts
Massachusetts Institute of Technology via Science Daily: A team of researchers from MIT and the Masdar Institute of Science and Technology may have found a way around this seemingly intractable tradeoff between efficiency and cost. The team has developed a new solar cell that combines two different layers of sunlight-absorbing material to harvest a broader range of the sun's energy. The researchers call the device a "step cell," because the two layers are arranged in a stepwise fashion, with the lower layer jutting out beneath the upper layer, in order to expose both layers to incoming sunlight. Such layered, or "multijunction," solar cells are typically expensive to manufacture, but the researchers also used a novel, low-cost manufacturing process for their step cell.
The team's step-cell concept can reach theoretical efficiencies above 40 percent and estimated practical efficiencies of 35 percent, prompting the team's principal investigators -- Masdar Institute's Ammar Nayfeh, associate professor of electrical engineering and computer science, and MIT's Eugene Fitzgerald, the Merton C. Flemings-SMA Professor of Materials Science and Engineering -- to plan a startup company to commercialize the promising solar cell. Cont'd...
NREL Research Puts the Wind at an Industry's Back
NREL's ultimate goal in this testing is to foster the technological developments necessary for wider deployment of wind energy in the marketplace at the lowest cost possible.
Making waves: Shetland tidal power breakthrough is another world first for Scotland
Martin Hannan for The National: HOUSEHOLDERS on the Shetland Isles were not aware of it, but when they plugged in their kettles recently, they were sharing in a bit of history.
For the Shetland Tidal Array at Bluemull Sound, installed by Nova Innovation of Edinburgh, has become the world’s first tidal power array to be connected to a grid and deliver power on a commercial basis – to dozens of homes on the islands.
The achievement has been hailed by environmentalists and the renewable industry as a turning point in the development of marine power.
Nova had shown its technology could work with a single turbine which generated electricity in March. But the installation of second turbine that is also working to the grid proves that large tidal power arrays can and do work. Commercially viable tidal power is seen as something of a Holy Grail by the industry, since it is one of the few renewable energy sources that is entirely predictable – as one industry source once put it: “there will be tidal power available as long as the moon is in the sky”. Cont'd...
Energy Storage North America Announces Innovation Award Finalists
Winners for each category will be determined by the ESNA Advisory Board (50%) as well as public voting (50%).
Indian Scientists Design Solar Tree to Save Space for Solar Power Generation
Anjana Pasricha for VOA News: Indian scientists have designed a “solar tree” that they hope will help overcome one of the key challenges the country faces in the generation of solar power.
With photovoltaic panels placed at different levels on branches made of steel, “solar trees” could dramatically reduce the amount of land needed to develop solar parks.
“It takes about four-square meters of space to produce energy which otherwise would have required 400 square meters of space. So almost 100 times the space is saved, which as you know is very valuable,” said Daljit Singh Bedi, chief scientist at the Council of Scientific and Industrial Research (CSIR) in New Delhi, whose laboratory in Kolkata developed the tree.
A scarce resource in India, acquisition of land to develop roads, factories and other infrastructure is a sensitive issue that has led to frequent and sometimes violent protests from displaced people. Cont'd...
San Bernardino County rejects a controversial solar power plant proposed for the Mojave Desert
Louis Sahagun for The LA Times: The San Bernardino County Board of Supervisors has rejected a controversial solar plant proposed for the Mojave Desert’s Soda Mountains, citing concerns that the project would destroy habitat and block ancient trails used by bighorn sheep for thousands of years.
In a 3-2 vote, the board on Tuesday declined to certify documents required under state law in order to issue county permits for the project on public land along Interstate 15 near the entrances to Joshua Tree National Park and Death Valley National Park, and less than a mile from the Mojave National Preserve.
“We endorse renewable energy, but this was the wrong project in the wrong location,” said Supervisor Robert A. Lovingood. Cont'd...
Could A Lithium Shortage De-Rail The Electric Car Boom?
Lithium has the purest of fundamentals of any 'commodity' out there, and the next oil barons look set to actually be lithium barons.
'Ideal' energy storage material for electric vehicles developed
Walt Mills for Phys.org: The energy-storage goal of a polymer dielectric material with high energy density, high power density and excellent charge-discharge efficiency for electric and hybrid vehicle use has been achieved by a team of Penn State materials scientists. The key is a unique three-dimensional sandwich-like structure that protects the dense electric field in the polymer/ceramic composite from dielectric breakdown. Their results are published today (Aug. 22) in the Proceedings of the National Academy of Sciences (PNAS).
"Polymers are ideal for energy storage for transportation due to their light weight, scalability and high dielectric strength," says Qing Wang, professor of materials science and engineering and the team leader. "However, the existing commercial polymer used in hybrid and electric vehicles, called BOPP, cannot stand up to the high operating temperatures without considerable additional cooling equipment. This adds to the weight and expense of the vehicles." Cont'd...
Why Businesses Should Care About Energy & Energy Management
The added bonus of energy management is that it will make it easier to implement policies that will be more sustainable in our changing world - both environmentally and economically.
US Energy Dept says "holy grail" of clean energy storage is imminent
Cat Distasio for inhabitat: Many countries are on the brink of becoming self-sufficient in their clean energy production, thanks to advances in battery technology that allow electricity from renewable sources to be stored and used on demand. Over the years, as renewable energy generation methods have charged forward, utility companies have struggled with how to integrate that clean energy in usable ways. Now, scientists at Harvard, MIT, Stanford, the Lawrence Livermore and Oak Ridge labs, and other agencies are working on energy storage projects funded by the U.S. Department of Energy, with their sights set on what the department calls the ‘holy grail’ of energy policy. The department says the industry could be transformed in as little as five to ten years.
Earlier this year, Advanced Research Projects-Energy (ARPA-E), the division of the U.S. Department of Energy founded in 2009 to oversee these projects, claimed to have achieved that goal. Without pointing to a specific invention or discovery, ARPA-E insists that the solution lies amid the 75 projects the agency is funding. The breakthrough technology—the next generation of renewable energystorage—is expected to be developed for large-scale usage in as little as five to ten years. Cont'd...
A Danish Wind Turbine Maker Harnesses Data in a Push to Stay Ahead
Stanley Reed for The New York Times: A project to install hundreds of wind turbines in the Fosen peninsula area of Norway at one point was shelved as unfeasible. The strong breezes that whip off the sea can shift and swing unpredictably, while the soaring cliffs and steep drop-offs create turbulence that wears out expensive equipment.
The venture was rescued with a lot of help from the mathematical calculations of Vestas Wind Systems, a Danish wind power company. Vestas used data to figure out how to use more powerful turbines for the project, and precisely where to place them. That meant the utility developing the facility could buy fewer turbines, helping cut costs and balancing the economics of the $1.2 billion project.
The company is at the forefront of efforts to make wind a competitive source of energy, rather than just a subsidized experiment. In doing so, it has become a model for the renewables industry, which has struggled at times to remain viable while facing cuts to government subsidies and volatile oil and gas prices. Vestas understands the fickleness of the renewable energy business. Cont'd...
SPI 2016 - Don't Miss The Solar Power International Show
This show is ideal for solar installers, contractors, commercial builders, utility companies, smart home builders, engineering firms and product developers. Of course, anytime is a good time to visit Vegas. So, dont miss this show.
Q2 2016 Deal Volume Comparison
Overall, solar companies categorized as wafer/ingot producers experienced the strongest margin performance over the last year, while each sector exhibited certain levels of improvement.
SolarCity to develop roofs made of solar cells
Lucas Mearian for ComputerWorld: Five million roofs are replaced each year in the U.S., so instead of simply swapping out old shingles with new ones, why not turn the whole roof into a solar power generator that's integrated with your home's electrical utility?
That is SolarCity's plan for a new product it expects to begin producing next year, according to statements made during the company's second-quarter earnings calllast week.
During the call, SolarCity Chief Technology Officer Peter Rive alluded to a new product that would be produced at the soon to open Buffalo, N.Y., solar panel manufacturing facility. Then SolarCity co-founder and Chairman Elon Musk interjected and said the product would be a solar roof, "as opposed to a [solar] module on a roof." Cont'd...
Records 2476 to 2490 of 5378
First | Previous | Next | Last
Featured Product
MORNINGSTAR - ReadyEdge
The ReadyEdgeTM (RE-1) accessory is an intelligent system controlling and reporting device meant to make monitoring your solar energy system more transparent. Enabling access to LiveViewTM 2.0 and Morningstar Solar ConnectTM, ReadyEdge provides data from all compatible Morningstar devices in your system. It is designed to be paired with the three ReadyBlock options, up to six total, with the possibility to use multiple ReadyShunts and ReadyRelays. The ReadyEdge is compatible with select Morningstar products.
