Innovative tidal technology gets $4.6 million funding
Anmar Frangoul for CNBC: The European Commission has awarded 4.4 million euros ($4.63 million) in funding to a European tidal energy consortium to demonstrate innovative technology for tidal turbines.
The consortium, led by Scotland's Nova Innovation, will use the funding to demo and show a "direct drive power take-off (PTO) solution" for tidal turbines. According to Nova Innovation, this technology could help to cut the lifetime cost of tidal power by 20 percent.
The project will be known as TiPA (standing for Tidal turbine Power take-off Accelerator) and run for 36 months. Organizations involved in the project include Siemens, the University of Edinburgh, and Delft Technical University, among others. Cont'd...
SolarWorld USA applauds new agenda for tougher enforcement of U.S. laws against unfair trade
SolarWorld says the statement is particularly welcome for the U.S. solar-manufacturing sector, which is among those industries that for years has been under attack from injurious dumping, especially by Chinese state-financed companies.
NRDC Report: Replacing Coal with Renewables and Energy Efficiency Can Lead U.S. to Cleaner Energy Future
Adopting cleaner energy and efficiency in our buildings, homes and consumer appliances also will provide more stability to the nations electric grid. And it will shield Americans from electricity bill spikes from potential natural gas price increases, NRDCs report, "Clean Energy and Efficiency Can Replace Coal for Reliable Modern Electricity Grid," shows.
A World Premiere - The First Hybrid FPV and Hydroelectric Dam Power Plant System
The installed 840 floating PV panels have a total peak capacity of 220 kilowatts and is expected to generate 332 megawatts per hour in its first year - equivalent to the annual consumption of around 100 homes.
Dukosi lands £2 million for next generation battery management technology
Company readies for production of wireless, cell-based management system for electric vehicle, industrial and grid energy storage applications
Amazon Launches Solar Energy Initiative on Fulfillment Center Rooftops
-Amazon to install solar systems on 50 fulfillment facility rooftops worldwide by 2020
-Initial 15 solar installations planned for completion by the end of 2017 will generate up to 41 MW
iDemand Energy Storage Goes Island Hopping in the Pacific with Hi-Power Solar
iDemand Energy Storage, a San Diego manufacturer of sustainable energy storage batteries, has entered into an agreement that allows Hi-Power Solar of Hawaii to be its exclusive dealer for that state.
Panasonic Announce 25-year Product Guarantee for HIT®
Panasonic, a global manufacturer of high-efficiency solar modules, will deliver significantly greater quality assurance to customers with a new 25-year product guarantee for its solar module HIT® series.
Prysmian ahead of schedule in the realisation of the Wikinger offshore wind farm in Germany
Cable laying phase successfully completed, highlighting Prysmian's capabilities in managing turnkey inter-array contracts for offshore wind
ABB delivers first urban battery storage solution in Denmark to support renewables
Battery Energy Storage System connected to main grid capable of supplying electricity to 60 households for 24 hours
DuPont Photovoltaic Solutions Introduces New Solamet® Metallization Pastes for Advanced Screen Printing at 2017 Tokyo PV Expo
As the industry leader in solar solutions that delivers proven power and lasting value for customers around the world, DuPont Photovoltaic Solutions introduced new innovations for its DuPontâ„¢ Solamet® photovoltaic metallization paste to enable advanced screen printing at the 2017 International Photovoltaic Power Generation Expo in Tokyo, Japan.
SEIA Statement on Settlement Reached in Arizona
Following is a statement by Sean Gallagher, vice president of state affairs for the Solar Energy Industries Association (SEIA), on the rate design settlement filed today with the Arizona Corporation Commission (ACC):
SimpliPhi Power and CivicSolar Partner to Bring Non-Toxic, Accessible Energy Storage Solutions to Residential Installers
SimpliPhi plug-and-play AccESS storage solution advantageous for new SGIP incentives
SEIA Hosts Inaugural Codes Conference to Help Industry Continue Solar Energy's Rapid Growth
Symposium will focus on requirements for installing solar on homes and buildings
Global Annual Installed Capacity of Small and Medium Wind Turbines is Expected to Exceed 446 MW in 2026, According to Navigant Research
Wind lease programs are becoming a more popular business model, and the applications for small wind turbines are expanding, report finds
Records 3181 to 3195 of 24385
First | Previous | Next | Last
Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.
