Octillion partners with Orison to create an energy storage system that can be installed at home
New energy storage system estimated to be less than a quarter of the cost of most battery storage units and weighs nearly 70 percent less.
Preventing Thermal Runaway Before It Begins
In Li-ion Battery Energy Storage Systems, off-gas detection up to 30 minutes before dangerous thermal runaway events enables action to deter potentially catastrophic cascading failure.
Improving Deep-Cycle Batteries Through Additives
Battery manufacturers have improved deep cycle battery performance through the use of additives, but not all of them result in the same benefit to customers.
Managing Deep-Cycle Batteries For Energy Storage During Stay-At-Home Orders
The increase in renewable energy homes and small businesses began as a way to lower power usage costs, but with more people sequestered in one place using electrical accessories, battery storage systems can suffer if they are not purposely built for energy storage use.
IDTechEx Research: Redox Flow Batteries' Advantages for Stationary Energy Storage Market
One of the main characteristics of this technology is the decoupled energy and power capacity. In fact, while the energy is stored in the electroactive species present in the electrolyte.
Understanding the Differences Between AGM And Flooded Deep-Cycle Batteries
The main design difference between FLA and AGM batteries is how the electrolyte is managed. In FLA batteries, the battery plates are submerged in the liquid electrolyte. During use, water in the electrolyte is broken down into oxygen and hydrogen gases and water is lost.
Care and Maintenance of Flooded Deep Cycle Battery Banks
The first session will provide an intermediate overview covering battery selection for various residential & commercial installations, proper system sizing and installation. The second session will continue this discussion. NABCEP Booth #43
INTERSOLAR and looking ahead to 2020 - Q&A with Rolls Battery
Rolls will also be participating as a product sponsor at the first annual Solar Games where competing teams will build a residential rooftop solar + storage system.
Booth #847
Top Article of 2019 - Zinc-air Battery Technology
Our batteries offer three to four times better life than lead acid batteries and they operate over a wide range of outdoor temperatures without cooling/heating.
The Role Telematics Will Play in Creating an Industry-standard EV Battery
OEMs are in need of an industry-standard EV battery to meet the expected demand, support a competitive marketplace, maintain energy affordability, and preserve the reliability of the electric grid.
Battery Pack Prices Fall as Market Ramps Up With Market Average at $156/kwh in 2019
Cost reductions in 2019 are thanks to increasing order size, growth in battery electric vehicle sales and the continued penetration of high energy density cathodes. The introduction of new pack designs and falling manufacturing costs will drive prices down in the near term.
Gridtential Energy and Crown Battery Build New Silicon Wafer Battery that Combines the Best of Lead and Lithium-ion Performance
Using technology similar to a solar cell, Gridtential Energy's breakthrough Silicon Joule™ technology allows batteries to deliver up to 5X the power density with up to a 40% weight reduction - and it can be manufactured in current lead battery plants.
Deep-Cycle Batteries used for Energy Storage
It is much more efficient to add energy storage closer to the point of use; such as with homeowners, subdivisions, communities, small towns and cities.
Lithium Iron Batteries for Energy Storage
The Lithium Iron technology possesses superior thermal and chemical stability, which provides better safety characteristics. Lithium phosphate cells are incombustible, and are more stable under overcharge or short circuit conditions.
Battery Streak Batteries Achieves 80% State-of-Charge in 10 Minutes
The new technology that we are using is called nano-structured materials. This is not nano-particles, but nano-structures. The distinction is that we make the electrode materials into tiny sponges, with the pores on the order of 10 to 50 nanometers.
Records 61 to 75 of 177
First | Previous | Next | Last
Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.
