Phono Solar to reveal new strategy at Intersolar San Francisco, Booth 8357

The innovative group continues to manufacture cutting-edge tools which will be on display at Intersolar San Francisco

Small Wind Turbine Pioneer Breaks 100,000 Kilowatt Barrier

Farm stables and stud owner Malcolm Bronte-Stewart has become the first Gaia-Wind turbine owner in the UK to generate more than 100kW of energy.

Examining the emerging markets in the CSP industry

The CSP Today latest report CSP Markets Report: New Edition (2011-2012), offers the opportunity to identify and define the real opportunities in the worldwide CSP markets.

Tension Test of Powerway Solar Mounting System

The tensile strength, yield strength and percentage elongation after fracture of Powerway solar mounting system all surpassed standard levels.

New technology converts exhaust heat into cooling, electricity

It sounds a little counterintuitive, but the wasted heat from automobile tailpipe emissions could one day be used to cool and power your car. Researchers from Oregon State University developed a thermally activated cooling system that harnesses the energy in waste heat produced by cars, factories, and power plants, and converts it to cooling. The system works by combining a vapor compression cooling cycle with an "organic Rankine cycle," an existing energy conversion technology, to convert waste heat from a thermal source to generate power and cooling. By turning 80 percent of every kilowatt of waste heat into a kilowatt of cooling capability, the system recycles exhaust heat that would otherwise escape into the atmosphere. The cooling system could be used to ventilate electronics systems that also require energy-intensive air conditioning to keep cool. The energy-recycling technology could also be used in vehicles to help power hybrid cars. Although less efficient than converting exhaust to cooling, the prototype can also be used to produce electricity to propel a vehicle. Only 15 to 20 percent of the waste heat can be converted to produce electricity, but it's better than letting the energy go to waste.

Christopher Associates to Exhibit A Range of New Solar Technologies at Intersolar North America 2011

Christopher's engineering and sales team will be on hand with supplier engineers to demonstrate technology and answer customer inquiries related to the new range of products.

Engineered Conductive Materials to Exhibit Stringer Attach Adhesives at Intersolar North America 11

Company representatives will be available to discuss the full line of conductive stringer attach adhesives, conductive adhesives for back contact crystalline silicon, thin-film and via fill applications, as well as conductive grid inks for photovoltaic applications.

Bentek Solar to Debut New Product Line at Intersolar North America 2011

Company representatives will be available to discuss Bentek Solar's full line of Circuit Breaker Re-combiners, Multiple Disconnect Safety Systems (MDSS) and Circuit Breaker Safety Systems (CBSS).

AREVA Solar Part of Consortium Selected for New Australian 250MW Solar Flagship Project

Solar Thermal/Gas Hybrid Power Project will be Largest Plant of its Kind in the World

Intersolar 2011 - DEGERenergie: Interest in producing solar energy for own consumption is increasing

Horb a.N., 20 June 2011. DEGERenergie is reporting big success at the industry's leading trade fair, Intersolar 2011 in Munich. Particularly smaller and medium-sized businesses showed a growing interest in the company's MLD technology, with the goal of producing solar energy for their own use.

DEGERenergie: MLD tracking attracts keen interest in Australia – great demand for off-grid solutions

Horb am Neckar, Germany, June, 2011. DEGERenergie reports keen interest in its MLD tracking systems in Australia. During the Clean Energy Week in Melbourne in early May, the company above all noticed a growing demand for off-grid solutions that also pay off without subsidized feed-in tariffs.

CSP-PV pricing… The ongoing price war

The ongoing PV vs CSP competition is studied in depth at the upcoming CSP TODAY USA 2011 event in Las Vegas (June 29-30) www.csptoday.com/usa

SILFAB SPA AND ISC KONSTANZ ANNOUNCE A NEW PV BREAKTHROUGH: A LOW‐COST/HIGH‐EFFICIENCY BACK‐CONTACT SOLAR CELL

As a result of the R&D partnership on Interdigitated Back‐Contact Cells (IBC) between Silfab SpA (Italy) and ISC Konstanz (Germany), a 19+% energy conversion efficiency has been obtained on monocrystalline silicon large area solar cells using a low cost industrial process, with a potential exceeding 22%.

Virginia Tech Wins EcoCAR Competition With An Extended-Range Electric Vehicle

The Ohio State University and the University of Waterloo Finish Second and Third

US Concentrated Solar Power Industry receives its biggest boost yet by American DoE

Following announcements for 2 loan guarantees in late 2010 to construct Ivanpah (a tower CSP plant by BrightSource Energy) and Solana (a parabolic trough with 7 hours storage by Abengoa), 2011 has come with an unprecedented levels of support by the DoE for the CSP industry. One of the companies who have recently secured DoE backing with a loan guarantee is celebrating their ground-breaking ceremony today. With over $2.1bl in founding, this plant will be the largest in the world at 1GW once it is complete. However, this journey to CSP market proliferation and support has been a turbulent one! 2011 has so far followed a positively similar trend, with $3.35bn having been announced by the DoE in loan guarantees for 4 different projects: Blythe (Solar Trust of America, 2x 240MW part of 1GW plant), Crescent Dunes (SolarReserve, 110MW tower project, The Mojave Solar Project (Abengoa, 280MW) and Genesis Solar Project (NextEra, 250MW trough project). The industry are waiting with baited breath to see whether 2011 will be the turning point in the US industry on its journey to market dominance.

Records 17206 to 17220 of 24003

First | Previous | Next | Last

Solar & Wind - Featured Product

Baja Carports Design-build Solar Support Systems™

Baja Carports Design-build Solar Support Systems™

Baja Carports specializes in design-build Solar Support Systems™ for mainframe carports & shade canopies. Our patented product line is designed in-house by Baja engineers. Product structures are pre-fabricated from pre-galvanized high-tensile, light gauge steel, and installed by Baja crews. Carports, RV/boat storage, EV stations, & ground mounts are customized to meet customers criteria. Baja's objective for each Solar Support System™ is to leverage optimal electrical production while maximizing coverage. Baja produces cost-effective carports for commercial businesses.