In the U.S., more than 19 MW of small wind energy systems were installed, with revenues totaling $115 million. More than 7,300 small wind turbines were installed in the U.S. in 2011. While the U.S. small wind turbine market decreased 26 percent in 2011, exports drove a 13.4 percent increase in U.S. manufacturer sales, according to AWEA’s 2011 Small Wind Turbine Market Report, which was released in full this week. A fact sheet on the report’s results was released in the spring, and now the full report is available online. In the U.S., more than 19 MW of small wind systems were installed, with revenues totaling $115 million. More than 7,300 small wind turbines were installed in the U.S. in 2011 for the sixth consecutive year (for comparison purposes, almost twice the number of utility-scale turbines installed). More than 150,000 total small wind turbines have been installed cumulatively in the last decade, and in 2011, cumulative installed U.S. capacity increased to 198 MW. Four U.S. manufacturers reported annual sales greater than 1 MW, and 27 manufacturers with a U.S. presence reported sales of 60 turbine models. While domestic sales by U.S. manufacturers accounted for an 80 percent share of the U.S. market by capacity and 90 percent of turbines sold, 54 percent of U.S. manufacturers’ output went to foreign markets—a major increase from 2010.
First multi-pin connector to meet the photovoltaic industry requirements in UL 6703A
• A delegation comprised of 25 government and industry representatives from Thailand visited the OPDE solar photovoltaic plant in Écija, Seville. • Their goal was to learn about the development and maintenance of the industrial group's big PV power plants.
When China published its ‘Administrative Measure on the Control of Pollution Caused by Electronic Information Products (EIPs)' in March 2007, it identified the labeling requirements and defined a list of restricted substances for electronics.
The 38 megawatt project, which is a large scale ground-mounted PV project based in California of USA, has been successfully completed this April with Clenergy's outstanding PV-ezRack SolarTerrace II ground mounting system.
The market for biogas sits at the confluence of a number of forces, including increasing demand for distributed generation, tightening environmental regulations, and accelerating buildout of infrastructure for natural gas powered vehicles.
Twenty years ago Maurice Strong, the secretary-general of the United Nations' first Earth Summit in Rio de Janeiro, declared that if our planet was to remain a hospitable and sustainable home for humans, the battle would be won or lost in major urban areas.
Senator Bingaman introduces bipartisan legislation to provide incentives for high-efficiency biomass heating systems in commercial and industrial installations
Renewable Energy can help assure Generation Adequacy - Texas State Senator José Rodríguez spoke at TREIA's June Policy Luncheon on the role renewable energy development can play in the Texas energy mix. He discussed net metering and the importance of delivering reliable energy to meet peak demand.
Courses aim to educate and train future scientists, engineers and researchers
Solar is one of the fastest growing industries in the United States, employing more than 100,000 Americans across all fifty states.
A consortium made up of SENER, Acciona, TSK and Crowie to build a 50 MW thermosolar plant in South Africa
The Bokpoort power plant, estimated to cost €300 million, will have over 100 km of SENERtrough® parabolic troughs and will employ a nine hour molten salt heat storage system
No Costly On-site Fabrication, Large Cranes or Special Tools Needed for Schletter's New, All-Steel PV Mounting System
Schletter's FS ECO™ is an all-steel ground mounted system, based on the company's renowned FS System™. The new system incorporates decades of engineering expertise to create a dynamic, cost-effective steel mounting system for improved bankability and risk management.
Manufacturer of thin film modules Calyxo from Saxony-Anhalt is reducing its costs and increasing its levels of effectiveness
Increasing levels of effectiveness of the modules, competitively priced complete solutions and innovative manufacturing technology
GEA to recognize leaders in geothermal development at GEA National Geothermal Summit Awards Dinner on August 7
Records 18646 to 18660 of 28031
Solar & Wind - Featured Product
â€‹StÃ¤ubli Electrical Connectors are used on more than 300 GW, over 50% of the PV capacity worldwide. The MC4 family of UL and TUV listed products include connectors, in-line fuses, branch connectors, cable assembly and more.