AC Solar Modules
Integrating the module and the inverter is a natural evolution. In the PC industry, silicon semiconductor components have been continuously integrated to reduce manufacturing cost, reduce complexity, and simplify the customer experience.
This weird $9 trick increases solar panel efficiency 5-17%
John Fitzgerald Weaver for electrek: Instead of perfectly spacing those 60 out - with small, defined areas between the cells - the company has allowed the solar cells borders to overlap each other while increasing the cell count to 68.
Solar panels: Nanotechnology gives green energy a green color
American Institute of Physics via Science Daily: Researchers have created green solar panels using soft imprint lithography to print an array of nanocylinders that scatter green light
SolarWorld collapses as Europe's solar industry eclipsed by China
Christoph Steitz for Reuters: Europe's embattled solar power industry has been dealt a fresh blow, with cut-price competition from China driving Germany's SolarWorld into insolvency.
New process for manufacturing PV cells means cheaper solar power
Phys.org: A major roadblock to the mass use of solar energy are photovoltaic (PV) solar cells. This is because the cost, inefficiency and negative environmental impact that the manufacturing of these cells outweighs any potential savings provided by the resulting solar energy. If, however, cost could be were minimised, then solar power would be more able to compete with traditional fossil fuel-based methods for generating energy.
To overcome this hurdle, the EU-funded SOLNOWAT project has developed an innovative dry process for manufacturing PV solar cells.
PV cells are typically created via a wet chemical process that etches away layers of silicon from a crystalline wafer, leaving behind the solar cell. The SOLNOWAT process replaces the expensive and inefficient wet chemical process with the use of atmospheric pressure dry etching technology – a process that cuts costs and speeds up production. Because less silicon is removed during dry etching, the resulting cells are darker, making them very efficient at absorbing light. In fact, they are so efficient that they have been classified as having zero global warming potential. Cont'd...
Chinese solar company opening local module factory in September
Victor A. Patton for Sacramento Business Journal: A solar module factory expected to bring more than 200 jobs to Sacramento is slated to begin production in mid-September at McClellan Business Park. It will be the first U.S. factory for Nanjing, China-based solar cell and module manufacturer China Sunergy Co, who on Thursday announced its subsidiary Sunergy America has agreed to lease a 140,000-square-foot manufacturing building — previously a plant where J.C. Penney made window coverings.
Simon Szeto, a Sunergy advisor, said the company will bring around 20 management staff from overseas and will hire other employees locally. The work being done at the factory will include putting together the modules. Each module includes a solar cell, an aluminum frame, tempered glass, cables and a junction box. The completed products, which can be placed on a ground mount or rooftop, will be sold commercially in the U.S, Szeto said. Cont'd...
SolarCity pushing industry to 40% increase in useful lifetime of solar power installations
John Fitzgerald Weaver for Electrek: In a new report released by SolarCity, we are seeing that solar power systems have a usable lifetime of at least 35 years – 40% longer than the market expects. The key finding of the report is that power degradation (annual efficiency loss) of solar panels supplied to SolarCity is as much as 35% lower than for a comparable industry-wide selection of non-SolarCity panels, which are typically expected to last for 25 years. SolarCity feels it is the implementation of a stringent and industry-leading “Total Quality Program” that has driven this.
SolarCity is in the unique position of being one of the largest deployers of solar panels – from multiple manufacturers – in the world, and with their tens of thousands of systems connected to a central database they know realtime performance. In the study here, SolarCity looked at greater than 11,000 panels to determine their data points and come to their conclusion that their solar panels are performing well beyond expected industry standards. Cont'd.. .
First Solar Achieves Yet Another Cell Conversion Efficiency World Record
Thin film record 22.1 percent research cell continues performance advancement trend
Thin film perovskite solar cell passes the efficiency test
Matthew Gunther for Chemistry World: Perovskite solar cells may one day rival silicon-based technologies, but their performance outside the laboratory has been a constant source of contention in the past year. Now, an international team of scientists has manufactured the first thin film perovskite solar cell with a reported efficiency that has beenofficially recognised by an accredited national test laboratory.1
Since their development in 2012, the performance of light-harvesting metal–organo halide structures has seemingly improved at a staggering rate, with their efficiency increasing by six percentage points in just two years – the same increase took multi-crystalline solar cells over two decades.
But their stability has been brought into question, with some international test centres taking issue with perovskite solar cells that are so unstable that they may degrade spontaneously in air, making it hard for them to assess their performance.
It’s a state of affairs that Michael Grätzel from the Ecole Polytechnique Fédérale de Lausanne in Switzerland has had trouble dealing with. ‘Conspicuously, you could see that from the very beginning there was very scarce information on the stability of these devices,’ comments Grätzel. ‘I have raised that issue many times – one would think that now everybody does stability work after this alarm was sounded, but not so.' Cont'd...
Cloaking Principle Could Boost Solar Cell Performance
Invisibility cloaking may be a long way from reality, but the principle could help improve the performance of solar cells in the near term.
In a series of simulations, researchers at the Karlsruhe Institute of Technology have demonstrated how cloaks made of metamaterials or freeform surfaces could eliminate shadows cast by energy-harvesting components onto the active surfaces of solar cells.
Contact fingers, which extract electric current, cover up to one-tenth of the surface area of a solar cell. By guiding light around these features, more of the sun's energy could be captured by the solar cell.
"Our model experiments have shown that the cloak layer makes the contact fingers nearly completely invisible," said doctoral student Martin Schumann. Cont'd...
SolarCity claims highest efficiency solar panel
Tristan Edist for the Business Spectator: SolarCity, the largest retailer of solar systems in the US (over 30% market share) and partly owned by Tesla’s Elon Musk, has announced it will produce the most efficient solar module available on the market at 22.04% conversion efficiency. SolarCity is claiming it has therefore managed to pip SunPower who have been the longstanding holder of the most efficient conventional silicon solar module on the market.
However in a subsequent discussion with Greentech Media, Peter Rive’s Chief Technology Officer conceded the majority of the panels coming off its pilot 100MW manufacturing line were hitting 21.8%. In 2017 the company will be then moving production to a new 1 gigawatt per annum capacity plant in Buffalo which can sometimes encounter challenges with achieving stable quality levels during production start-up.
SunPower claims 21.5% efficiency for its X-Series panel although often manufacturers will have some variance in performance of panels and make claims based on conservative estimates of performance. Greentech Media quotes an anonymous Sunpower source saying that 22% efficient panels are already coming off its production lines. In addition the company is targeting achieving 23% conversion efficiency from panels it will manufacture from its fifth fabrication line, scheduled for start-up in 2017.
Cont'd...
Researchers develop cool way to improve solar cell efficiency
By Kelly Hodgkins for Digital Trends: A team of engineers from Stanford University have invented a cool way to improve the performance of solar panel arrays. A new material that the team produced literally will lower the temperature of solar cells even while they are operating in full-strength sunlight. As the solar cells cool, their efficiency will rise, leading to significant gains in the amount of energy harvested from the sun.
Solar panel technology has improved by leaps and bounds, but the technology has a flaw that limits the efficiency of the system. The panels must face the sun to operate, but the heat from this exposure diminishes their ability to convert light into energy. The hotter they get, the less efficient they become. This issue has perplexed the industry for years, but the Stanford team may have discovered a material that can help dissipate this excess heat without affecting the operation of the solar array.
The solution, proposed by Stanford electrical engineering professor Shanhui Fan, research associate Aaswath P. Raman, and doctoral candidate Linxiao Zhu, uses a material that is able to capture and emit thermal radiation (heat) away from the solar call. While deterring heat buildup, the thin, patterned silica material does not block sunlight, allowing the photons to enter the solar panel where they are converted to energy. It’s a win-win situation, allowing the free flow of sunlight and the removal of excess heat from the system. Cont'd...
Solar windows can power buildings
By Lucas Mearian for Computerworld: Manhattan has approximately 47,000 buildings with around 10.7 million windows, according to a 2013estimate from The New York Times.
Now imagine if just 1% -- or 100,700 -- of those windows could generate electricity through transparent photovoltaics.
That's the idea behind solar power windows, and at least two companies are hoping to sell the technology to window manufacturers, saying once installed in a building the technology will pay for itself in about a year.
"If you look at the glass that's manufactured worldwide today, 2% of it is used for solar panels; 80% of it is used in buildings. That's the opportunity," said Suvi Sharma, CEO of solar panel maker Solaria. Cont'd...
Midsummer granted a loan of 10 MSEK from Almi for continued development of thin film solar cell production equipment
The loan is meant to support Midsummer's focus on production and sales of the DUO machines used for the production of flexible thin film solar cells.
Silfab Solar Increases Module Production to 300 MW
Expands and Upgrades Facility to Meet Growing North America Demand
Records 46 to 60 of 104
First | Previous | Next | Last
Featured Product
EVERVOLT home battery storage: Dependable power, with or without solar
Whether paired with solar or used independently, the renewable energy stored in an EVERVOLT home battery system serves as a reliable backup against unpredictable utility grid fluctuations and weather-related events. Keep essential appliances running longer and maintain your lifestyle during unforeseen circumstances. Our EVERVOLT battery storage systems are backed by a comprehensive 12-year warranty from Panasonic, including coverage for labor. Learn More about Panasonic EVERVOLT.
