Newly Built Concentrated Solar Power Plants - Time To Consider Flushing and Cleaning as an Industry Standard?
A recent research paper published in Applied Thermal Engineering highlights the importance of defined protocols to effectively flush and clean newly built facilities, which is needed prior to filling the system with expensive fluids, such as solar thermal fluids.
EPFL Scientists Achieve Record-Level Reproducibility for Perovskite Solar Cells
Perovskite solar cells hold much promise for cost-effective solar energy. However, heat stability is an issue, and can significantly limit the solar cell’s long-term efficiency. A team of scientists led by Michael Grätzel’s lab at EPFL has now developed a cesium-containing perovskite solar cell that has achieved efficiency of 21.1%, as well as record-level reproducibility. The work is published in Energy and Environmental Science.
By adding cesium, the EPFL scientists, led by postdoc Michael Saliba, made the first ever triple-cation perovskite mixture (Cs/MA/FA). The new films are more heat-stable and less affected by fluctuating surrounding variables such as temperature, solvent vapors or the heating protocol used for the device. But more importantly, they also show stabilized power-conversion efficiencies of 21.1% and outputs at 18% under operational conditions, even after 250 hours.
“This is an absolute breakthrough,” says Michael Saliba. “These properties are crucial for commercializing perovskite photovoltaics, especially since reproducibility and stability are the main requirements for cost-effective large-scale manufacturing of perovskite solar cells.” Source AZOCleantech...
What is Solid-State RF Energy?
Magnetrons will eventually be replaced by solid-state RF power amplifier modules and controllers within the following applications: industrial heating and drying, plasma generation, chemical processing, commercial cooking (restaurants, fast re-heat and thawing) and, last but not least, consumer microwave ovens.
Lead Recycling Threatened By Lithium-ion
The U.S. Society of Automotive Engineers (SAE) and the International Electrotechnical Committee (IEC) are proposing to develop standardized labels that are color-coded to allow for better identification between lead-acid and lithium-ion batteries.
United Airlines is flying on biofuels ... here's why that's a really big deal
Chelsea Harvey for The Washington Post: On Friday, United Airlines will launch a new initiative that uses biofuel to help power flights running between Los Angeles and San Francisco, with eventual plans to expand to all flights operating out of LAX. It's the first time an American airline will begin using renewable fuel for regular commercial operations, and the occasion is part of a bigger movement when it comes to clean transportation in the U.S.
The renewable fuel used to power United's planes will be coming from a Los Angeles refinery operated by AltAir Fuels, which is using the facility to produce both renewable jet fuel and diesel fuel using a technology developed by Honeywell UOP, a major supplier and technology licenser in the petroleum industry. Back in 2013, AltAir and United announced their partnership, in which United will purchase up to 15 million gallons of biofuel over a three-year period.
Friday's launch will be the first application of that agreement. The flights will use a mixture of 30 percent biofuel and 70 percent traditional fuel, and United says that the biofuel will help reduce greenhouse gas emissions by about 60 percent compared with regular fuel. Cont'd...
Interview with Michael Wiener of SolarRoofHook.com
In general, the installer just removes the roof piece, locates the rafters, drills pilot holes, fastens the product to the rafter, properly seals the penetration, and grinds the tile where the mount is located before placing the roof piece back over or around the mount.
Solar Thermal Fluid Sampling: Personal Safety and System Design Considerations
Managing fluids at high temperatures presents a safety hazard as the fluid may come into contact with the engineer whilst the fluid is being sampled
Case Study: Solar Project Powers Empowerment For The Disabled
Melwood partnered with Standard Solar to build a 413.8 kW rooftop system on its Horticulture Training Center, along with a 517.1 kW carport system (930 kW total), which will provide 95 percent of the centers energy needs.
Even out the Odds: A Switch to Greener Transport
India must look beyond its current state towards the type of country it hopes to become, and must find a balance between increasing wealth and prosperity, acceptable mobility and access, and low emission levels.
These 10 Places Broke Records In Renewable Energy
The following nations have, at one point or another, broken global records in renewable energy use, production or technology development.
Solar Thermal Fluids - Why It Is So Important To Choose The Right Fluid
The most popular fluid used in CSP plants is the eutectic mixture of BDO. This fluid has a high operating temperature (up to 400 degrees Celsius), a low viscosity and good thermal stability.
Sparking an Energy Revolution: Artificial photosynthesis in Fuel Cells a Promising New Discovery
Recently, there have been many boosting developments in the conception of new methodologies for generating hydrogen for fuel cells without resorting to fossil fuel as support.
How Battery Power Sustains Wind-Blown and Sun Struck Grids
Utilities are turning to energy storage systems (ESS) to help power grids withstand the effects of high peak demands, instability and the unpredictability of energy that can be gone with the wind.
Monumental Market Conditions Revealed as First Mexican Clean Energy Capacity Auction Prequalification Bid Window Closes
The first auction price bids are due in March, and prequalification for the second renewable auction in Mexico is expected to take place in as early as May or June.
Heat From Sewage
So far IWS technology has been installed in multi-unit residential developments, wastewater treatment facilities, a public theatre and a university campus.
Records 901 to 915 of 3405
First | Previous | Next | Last
Featured Product
Quality assurance in the manufacturing industry
Efficiency and precision with CSP software. In the highly competitive world of manufacturing, quality assurance is a critical factor for success. CSP offers you state-of-the-art software solutions specifically designed to ensure the highest standards of quality assurance in the manufacturing industry.
