Stäubli continues to expand its North American manufacturing of solar PV components
Supports increased demand for domestically made, high-quality connectors and wire harnesses, driven in part by the US Inflation Reduction Act
NREL Proof of Concept Shows Path to Easier Recycling of Solar Modules
The use of femtosecond lasers to form glass-to-glass welds for solar modules would make the panels easier to recycle, according to a proof-of-concept study conducted by researchers at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL).
Demolition Ranch HQ, Boerne, Texas―Case Study
Due to the ranch's remote location, the owner wished to build an off-the-grid building featuring a 3.84kW rooftop solar array together with a battery storage system to power the building. The rooftop solar modules are secured in place using the ProteaBracketTM by S-5!
Solar Analysis: What is it & How Does it Work
Solar analysis is a comprehensive assessment of a location's solar potential. It involves the evaluation of various factors that influence the effectiveness of harnessing solar energy, such as sunlight exposure, shading, and the optimal placement of solar panels.
What Is Roof Underlayment & Why It's Important
Roof underlayment is the unsung hero of roofing systems, playing a vital role in protecting buildings from various environmental threats. Its significance spans across different roofing types, including the increasingly popular metal roofs, shingles, and tiles.
Biden-Harris Administration Announces $7 Billion Solar for All Grants to Deliver Residential Solar, Saving Low-Income Americans $350 Million Annually and Advancing Environmental Justice Across America
EPA announces 60 selectees under Greenhouse Gas Reduction Fund grant competition to deliver solar to more than 900,000 low-income and disadvantaged households nationwide through the President's Investing in America agenda
Utility-Scale Drone-in-a-Box Inspection
Raptor Maps collaborated with Enel, DJI, and UVT to conduct the first-ever DJI Dock solar site inspection in North America. Conducted on a 180+ MWdc site, Raptor Maps built the necessary mission planning software to direct the drone to conduct the inspection.
Origami Solar Announces Results of Third-Party Testing of Steel Solar Module Frames
Rigorous, Independent Testing Prove Steel Frames Pass Corrosion, Loading and Other Required Tests for Module Certification
Renewable Energy Solutions with Intermountain Wind & Solar
This installation just down the street from Weber State University maximizes solar panel placement to offset the energy needs of the newly constructed five-story apartment building in the scenic Gardens neighborhood on 40th Street.
Puerto Rico Can Reach Its 100% Renewable Energy Goal by 2050
NREL Led PR100 Study That Modeled Possible Scenarios Built on Stakeholder Priorities of Energy Affordability, Resilience and Reliability, Land Use, and Economic Benefits
Improving Post Harvest Management through Portable Solar Cold Storage Systems - A Case Study from the Northeastern Part of India
The local farmers were informed about the Solar-Powered Cold Storage through the field staff and the District Agriculture Department. About 40 farmers started using Solar Cold Storage facilities in a year, primarily for storing potatoes.
Why Getting Women Involved Is Key to Renewable Energy Growth
Publicity surrounding green energy expansion features photos of men climbing wind turbines or on rooftops installing solar panels. There are women in the industry, but there is room for growth.
Wall Mounted Solar Thermal System
Our solar thermal system consists of a panel mounted on a building's south-facing wall (panel size depends on the heating objective - 4x6', 4x8', 4x10'), a controller (the system's "brain"), a fan to push or pull the warm air, & some ducting.
Trina Solar Powers New Zealand's Largest Solar Farm with Integrated Module-Tracker Solution
This is the first Trina Solar project in the Oceania region to integrate both Trina Solar modules and TrinaTracker (a business unit of Trina Solar) smart tracking systems.
Rapid Assessment of Wind Damage
The asset owner needed to quickly assess the damage to prepare for possible insurance claims and develop a remediation strategy. Raptor Maps' analysis found more than 20MWdc of site capacity was impacted by equipment anomalies.
Records 136 to 150 of 4009
First | Previous | Next | Last
Solar Power - Featured Product
OMCO Origin® Factory-Direct Trackers
A One-In-Portrait (1P) solution for a wide range of solar projects within utility scale, distributed generation (DG), and community solar markets manufactured and factory preassembled in the USA at OMCO Solar with full-scale support, and design for quick, easy and safe installation, and fewer trackers per MW. OMCO makes all structural components with domestic steel and this balanced design allows for more accurate targeting and reduced energy consumption. OMCO Origin® Factory-Direct Trackers include universal module mounts with options for all commercially available modules, labor-saving bearings with 6 adjustable ways to compensate for posts and terrain issues, and foundation solutions for every terrain including OMCO C Piles.
