Natural Power adds to Heat Network Consultant status
Natural Power's Senior Renewable Heat Engineer, Guy Milligan, has joined the Chartered Institution of Building Services Engineers (CIBSE) Certification Register of Heat Network Consultants following his training and exam success.
Maine Woods Pellet Co. chooses Turboden ORC Technology Instead of Traditional Steam
8 MWe biomass ORC system for the largest pellet manufacturer in Maine (USA).
NREL Brings Together Clean Energy Innovators at Industry Growth Forum
Event recognizes top startup businesses and clean energy technologies
NREL Brings Together Clean Energy Innovators at Industry Growth Forum
Event recognizes top startup businesses and clean energy technologies
Using Shipping Containers to Construct a Biomass Recycling Facility
A Certificate of Occupancy on a building constructed of 60 Intermodal Shipping Containers is a huge accomplishment for Paul Wever, president of Chip Energy Inc.
From moo to goo: Cooperating microbes convert methane to alternative fuel source
Permanent Green Energy Production
All terrestrial energy sources except nuclear, geothermal and tidal are from current solar insolation or from fossil remains of plant and animal life that relied directly and indirectly upon sunlight, respectively.
Enerkem achieves all production milestones at its Edmonton biofuel facility
"The Enerkem Alberta Biofuels facility in Edmonton is fully operational in accordance with very rigorous production criteria", said Vincent Chornet, President and Chief Executive Officer of Enerkem. "This third-party validation comes in at the right time as we are expanding our footprint in North America and Europe. Our disruptive solution sets a new standard in waste management, biofuels and chemicals, thus accelerating the transition toward a circular economy where waste becomes a resource to make everyday products."
The Geothermal Resources Council Announces 2017 Amateur Photo Contest
The 38th Amateur Photo Contest winners will be announced at the GRC Annual Meeting in Salt Lake City, Utah, USA.
Cellulose to Sugar (CTS) Technology for Ethanol Production
The CTS reactor creates a mechanochemical reaction within minutes and breaks down the cellulose to its base components of C5 and C6 sugars and Lignin. The sugars can then be fermented to create biofuels, fine chemicals, or a number of other items including pharmaceuticals, carbon fiber nanotubes, construction products, and nutraceuticals to name a few.
SAAB Gripen flies on 100 percent biofuel
The flights marked the first time a single-engined fighter flew with 100 percent biofuel. A twin seat Gripen D was used for the flights that took off from Saabs facilities in Linköping, Sweden.
The GRC Awards - Seeking the Best in Global Geothermal
The winners will be announced at the GRC Annual Meeting in Salt Lake City, Utah, USA.
Aries Clean Energy Is Solving Major Sustainability Problems, Advancing Innovation with R&D Team
Formerly PHG Energy, Aries Clean Energy has evolved its biomass gasification focus to take on a greater innovation role in the clean tech energy industry
Can Sewage Solve Our Energy Crisis?
Sewage-to-energy would cut costs, and reduce greenhouse gas emissions. Industry calculations show that if all biosolids in the United States were converted into biomass energy, they would yield 7 million to 7.6 million megawatts of energy, while the existing capacity of wind power in the United States is approximately 43,000 megawatts.
Andy Yuill attends World Bio Markets
Natural Power's Senior Bioenergy Manager, Andy Yuill, will be on the panel for a session on 'Highlighting the role of policy in driving demand and market security' at the World Bio Markets conference which takes place from 27th - 29th March in Amsterdam.
Records 1801 to 1815 of 2383
First | Previous | Next | Last
Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.
