Intersolar North America Expands Downstream Workshops, Technical Trainings
CALSEIA Contractor Day Returns for Second Year Along With Sessions From NABCEP, SEI and NAATBatt to Educate Solar Sales and Installation Teams on Policy Regulations, New Products, Technical Issues and Industry Best Practices
New method can make cheaper solar energy storage
Storing solar energy as hydrogen is a promising way for developing comprehensive renewable energy systems. To accomplish this, traditional solar panels can be used to generate an electrical current that splits water molecules into oxygen and hydrogen, the latter being considered a form of solar fuel. However, the cost of producing efficient solar panels makes water-splitting technologies too expensive to commercialize. EPFL scientists have now developed a simple, unconventional method to fabricate high-quality, efficient solar panels for direct solar hydrogen production with low cost.
The work is published in Nature Communications.
Many different materials have been considered for use in direct solar-to-hydrogen conversion technologies but "2-D materials" have recently been identified as promising candidates. In general these materials—which famously include graphene—have extraordinary electronic properties. However, harvesting usable amounts of solar energy requires large areas of solar panels, and it is notoriously difficult and expensive to fabricate thin films of 2-D materials at such a scale and maintain good performance.
Kevin Sivula and colleagues at EPFL addressed this problem with an innovative and cheap method that uses the boundary between two non-mixing liquids. The researchers focused on one of the best 2-D materials for solar water splitting, called "tungsten diselenide". Past studies have shown that this material has a great efficiency for converting solar energy directly into hydrogen fuel while also being highly stable. Cont'd...
Ballard Announces Acquisition of Protonex
Ballard Power Systems (NASDAQ: BLDP; TSX: BLD) today announced that it has signed a definitive agreement to acquire Protonex Technology Corporation ("Protonex"; www.protonex.com), a leading designer and manufacturer of advanced power management products and portable fuel cell solutions. As consideration for the transaction, valued at $30 million, Ballard is assuming and paying Protonex's debt obligations at closing, currently estimated at approximately $4.4 million, and paying the balance of approximately $25.6 million through the issuance of 11.2 million Ballard shares. The number of Ballard shares to be issued is subject to adjustment based on the final debt obligations at closing.
Vanadium Flow Batteries for Global Academy of Technology (GAT) College
By implementing the IMERGY storage solution in the premises, GAT is able to store the energy produced by the PV panels during the day and use it during the non-solar time, thus eliminating the diesel generator run to provide clean power when needed.
Is Adding Solar Batteries Worth it?
Seeking to help states better address the value proposition of solar+storage systems, the Interstate Renewable Energy Council, Inc. (IREC) engaged Clean Power Research (CPR) to develop a methodology that could be used to value solar energy coupled with battery storage. The methodology described in the report can be applied in any location. It focuses on Hawaii as an example, as it is likely to be an early adopter of storage regulations.
"The concept of adding batteries alongside a utility customer's solar array intrigues utility customers, solar developers, and utility planners on several levels, but the underlying question for everyone is whether adding batteries is 'worth it,'" says Jason Keyes, Partner at Keyes, Fox & Wiedman LLP, attorney for IREC and report collaborator.
Though still at a nascent stage, the recent rapid growth in the distributed energy storage market suggests that now is an opportune time to take a closer look at distributed energy storage, especially in combination with distributed solar, and the values it has to offer. The new IREC study lays out the methodology to do just that and sets forth a pathway for more robust analysis and dialogue. Cont'd...
Is Adding Solar Batteries Worth it?
Landmark Methodology Report Helps Unlock Value of Solar PV + Energy Storage
A Framework to help states quantify benefits, understand opportunities
SunEdison and Green Charge Networks Team Up To Deliver Additional Electricity Savings With Solar Plus Energy Storage Offering
Silicon Valley Power is the First Joint Customer of the New Strategic Partnership
----California Commercial and Municipal Customers Can Save Even More with Zero Upfront Costs
Ultracapacitor Usage in Wind Turbine Pitch Control Systems
Ultracapacitors have other significant advantages compared to batteries such as high power density, high efficiency, long service life, predictable aging, wide operating temperature range and light weight.
E-STOR Wins Renewable Energy Accolade
Future Transport Systems (FTS) is celebrating after winning its first national award on Thursday 18th June.
FTS won the Innovation Category of the British Renewable Energy Awards 2015 with its E-STOR product. E-STOR re-purposes used electric car battery packs to store and distribute power generated by renewables - and optimise its use.
First energy storage system for primary frequency regulation in France
Alstom and Safts innovative energy storage goes live at EDFs Concept Grid
Five seismic shifts to shake global electricity over next 25 years
BNEF's forecast to 2040 sees $2.2 trillion boom in small-scale solar as consumers seize control of their power, and weaker growth in electricity demand, but prospects for the climate are bleak
24M Introduces the Semisolid Lithium-Ion Battery
Company Emerges from Stealth with $50M in Private Capital and a Revolutionary New Technology That Will Slash Todays Lithium-Ion Battery Costs by 50%
Swedish fuel cell developer PowerCell receives its first order of the S2 fuel cell stack platform
A German company has ordered two fuel cell stacks of the S2 platform of 25 kW each.
CalCom Solar Recognized by Governor's Office of Business and Economic Development with California Competes Award
Cal Competes Spurs Additional Solar Deployment and Job Creation in Central Valley by Providing Tax Credits to Fast-growing Companies like CalCom Solar
24M Introduces the Semisolid Lithium-Ion Battery
Today, 24M emerged from stealth mode to introduce the semisolid lithium-ion cell, a revolutionary technology that solves the grand challenge of energy storage by enabling a new, cost-effective class of the lithium-ion battery. 24M’s semisolid lithium-ion is the most significant advancement in lithium-ion technology in more than two decades and combines an overhaul in battery cell design with a series of manufacturing innovations that, when fully implemented, will slash today’s lithium-ion costs by 50% and improve the performance of lithium-ion batteries. The technology will accelerate the global adoption of affordable energy storage.
Until now, the energy storage field has had two options to try to drive down costs – build massive and complex factories to produce lithium-ion batteries in high volumes or pursue entirely new chemistries that may never move from the lab to the commercial floor. With the invention of the semisolid lithium-ion battery, 24M presents a third option – work with the world’s preferred energy storage chemistry and unlock new opportunities for cost reductions through new cell design and manufacturing innovations. 24M’s platform is the most significant advancement in lithium-ion technology since its debut more than 20 years ago.
Records 6031 to 6045 of 6242
First | Previous | Next | Last
Energy Storage - Featured Product
HPS EnduraCoilTM Cast Resin Medium Voltage Transformer
HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.
