China's Solar Panel Glut Undermines Its Agreement with the EU
By Reuters: “We fear a second wave of bankruptcies,” said the head of an association of EU solar producers. A sharp increase in solar power production in China and a sharp fall in domestic demand have sparked a sudden surge of cut-price exports, undermining a China-EU agreement to limit damage to European producers.
China produced 27 gigawatts (GW) of solar photovoltaic (PV) modules in the first half of 2016, an increase of 37.8 percent and installed 20 GW of new solar power capacity in the same period, three times as much as the same period a year ago.
However, demand has since tailed off. Solar projects operational since July face a reduced price paid by grid operators for their power. Cont'd...
Silicon Carbide (SiC) Inverter Technology Increases Efficiency to 99%
The efficiency gain equals to approximately $2.5M additional energy being produced over a 100MW power plant's lifetime, on average at the global level.
New technology puts solar power to work all night long
ScienceDaily: Energy storage is crucial for taking full advantage of solar power, which otherwise suffers interruptions from cloudy skies and nightfall. In the past few years, concentrating solar power plants have begun producing additional electricity at night and during peak demand periods by using stored heat energy to propel a steam turbine.
Current thermal energy storage systems rely on materials that store less energy per kilogram, requiring more material at a greater cost to meet energy storage requirements.
Now, researchers at the U.S. Department of Energy's (DOE's) Argonne National Laboratory have designed an inexpensive thermal energy storage system that will be significantly smaller and perform more than 20 times better than current thermal systems. Cont'd...
Alternative Energy Project Financing
If storage costs can demonstrate price reductions comparable to what we've experienced with wind and solar, storage will be a big part of the story.
Is solar power in nuclear disaster exclusion zones advisable?
ARNOLD GUNDERSEN for Bulletin of the Atomic Scientists: My own experience near solar arrays in Fukushima Prefecture indicates that the problems of building and maintaining solar installations in a contaminated nuclear wasteland are over-simplified, and worse, totally ignored. One of the greatest burdens of maintaining operating atomic reactors is the cost of working in a Radiologically Controlled Area. (The Lawrence Berkeley National Laboratory defines a Radiologically Controlled Area as: “Any area to which access is managed to protect individuals from exposure to radiation or radioactive materials. Individuals who enter Controlled Areas without entering Radiological Areas are not expected to receive a total effective dose equivalent of more than 0.1 rem (0.001 Sievert) in a year.”) Each nuclear power plant operates with specific instructions and constraints, with Radiation Work Permits tailored for each specific maintenance activity. Because special clothing, special respiratory equipment, and special radiation monitoring equipment are routinely required to perform even minimum maintenance activities inside a nuclear power plant, every activity takes longer, costs more, and requires more people inside each reactor than necessary in any other industrial setting.
Consequently, the question becomes: Does building solar panels on land contaminated with nuclear waste resemble work in a normal industrial setting, or is it more similar to work inside a radiologically contaminated atomic reactor—at significantly higher cost? Full Article:
Is Rent-to-Own Solar Power the Answer?
Jason Overdorf for SMITHSONIAN.COM: For a little more than a year, the family has been supplementing the sporadic electricity the village gets from the grid with solar energy, thanks to a new pay-as-you-go business model pioneered by Canadian entrepreneur Paul Needham and his company, Simpa Networks. Call it “rent-to-own solar.”
Needham is a serial tech entrepreneur whose online advertising company BidClix made its way into the portfolio of Microsoft. As a doctoral student in economics at Cambridge, he was obsessed with the reasons customers will shell out for certain products and not others. One of the questions that always bugged him was, “Why don’t I own solar panels?” The reason, he determined, was the high up-front costs.
Imagine if mobile phone service was sold like solar energy. From an operator’s perspective, it would have made great sense to try to sell customers 10 years of phone calls in advance, so as to quickly earn back the money invested in building cell towers. But the person who suggested such a strategy would have been fired immediately, Needham says.
“You want to charge people for what they value, not the technology that’s providing it,” he says in a telephone interview. Cont'd...
Special News Report for Solar Power International 2016
New product announcements and news from SPI 2016. Post your company news or read about what others are doing at the show.
Increasing the Storage Capacity of Lithium Batteries
BioSolar is developing electrode material technologies to increase the storage capacity, lower the cost and extend the life of lithium-ion batteries.
Why large-scale wind power is so hard to build
Michael McDonald, Oilprice.com via USA Today : he Bureau of Land Management faces a problem and wants to shake up the rules around wind farm approvals. The problem is straight-forward on its face, but difficult to reconcile logically: Why are so few new large-scale wind projects being built? Despite the fact that nearly everyone – environmentalists, government regulators, and business interests –wants to build more wind farms, precious few are making it over the goal line.
Since 2009, the Obama Administration has approved 46 wind farm projects that would cover a proposed 216,356 acres of public land. Yet only 15 of these 46 projects have made it into operation. The rest are stuck in limbo with years of mandatory environmental analysis ahead or have been cancelled outright. Cont'd...
Batteries Get a Boost From California Utilities
If we stop and take a critical look at the fragility of our energy supply system, we see that it could be strengthened by distributing energy generation and storage. This means it's not just the utility company's job to store energy… it's everyone's job.
Solarodo - New and Used Solar Equipment Marketplace
We want to use the experience we gained in Europe and create the platform with the biggest product variety in the US.
Transparent solar panels are 50 times more productive than regular photovoltaics
Luke Dormehl for DigitalTrends: As the term “regular windows” suggests, users don’t have to replace the existing windows in their home, but need only treat them with a special process developed by the company.
“We apply liquid coatings to glass and plastic surfaces at ambient pressure, and dry these coatings at low temperature to produce transparent films,” Conklin continued. “We repeat these processes, and then collectively these coatings — and thus the glass and plastic surfaces — generate electricity.”
Of these coatings, the most important is the so-called “Active Layer,” through which electricity is generated by the absorption of light, and the transparent conductors, which allow the electricity to be extracted. “[The] coatings are primarily organic, primarily from carbon, hydrogen, nitrogen, and oxygen,” Conklin said. “We are constantly refining each of the layers to improve on the power we’re able to extract from these coatings and enhance their manufacturability.” Cont'd...
Solar cell is more efficient, costs less than its counterparts
Massachusetts Institute of Technology via Science Daily: A team of researchers from MIT and the Masdar Institute of Science and Technology may have found a way around this seemingly intractable tradeoff between efficiency and cost. The team has developed a new solar cell that combines two different layers of sunlight-absorbing material to harvest a broader range of the sun's energy. The researchers call the device a "step cell," because the two layers are arranged in a stepwise fashion, with the lower layer jutting out beneath the upper layer, in order to expose both layers to incoming sunlight. Such layered, or "multijunction," solar cells are typically expensive to manufacture, but the researchers also used a novel, low-cost manufacturing process for their step cell.
The team's step-cell concept can reach theoretical efficiencies above 40 percent and estimated practical efficiencies of 35 percent, prompting the team's principal investigators -- Masdar Institute's Ammar Nayfeh, associate professor of electrical engineering and computer science, and MIT's Eugene Fitzgerald, the Merton C. Flemings-SMA Professor of Materials Science and Engineering -- to plan a startup company to commercialize the promising solar cell. Cont'd...
NREL Research Puts the Wind at an Industry's Back
NREL's ultimate goal in this testing is to foster the technological developments necessary for wider deployment of wind energy in the marketplace at the lowest cost possible.
Making waves: Shetland tidal power breakthrough is another world first for Scotland
Martin Hannan for The National: HOUSEHOLDERS on the Shetland Isles were not aware of it, but when they plugged in their kettles recently, they were sharing in a bit of history.
For the Shetland Tidal Array at Bluemull Sound, installed by Nova Innovation of Edinburgh, has become the world’s first tidal power array to be connected to a grid and deliver power on a commercial basis – to dozens of homes on the islands.
The achievement has been hailed by environmentalists and the renewable industry as a turning point in the development of marine power.
Nova had shown its technology could work with a single turbine which generated electricity in March. But the installation of second turbine that is also working to the grid proves that large tidal power arrays can and do work. Commercially viable tidal power is seen as something of a Holy Grail by the industry, since it is one of the few renewable energy sources that is entirely predictable – as one industry source once put it: “there will be tidal power available as long as the moon is in the sky”. Cont'd...
Records 661 to 675 of 3575
First | Previous | Next | Last
Featured Product
Dynapower - MAXIMIZE PRODUCTION AND REVENUES WITH SOLAR PLUS STORAGE
The addition of energy storage to an existing or new utility-scale PV installation allows system owners and operators the opportunity to capture additional revenues. Traditional storage plus solar applications have involved the coupling of independent storage and PV inverters at an AC bus or the use of multi-input hybrid inverters. An alternative approach - coupling energy storage to PV arrays with a DC-to-DC converter - can help maximize production and profits for existing and new utility-scale installations. DC-Coupled Utility-Scale Solar Plus Storage leads to higher round-trip efficiencies and lower cost of integration with existing PV arrays and at the same time, opens up new revenue streams not possible with traditional AC-coupled storage, including clipping recapture and low voltage harvesting, while being eligible for valuable tax incentives.
