Saft Li-ion energy storage will maintain the balance of power for Finland's transition to a solar economy

The Saft Intensium® Max containerized energy storage system, with a nominal output of 2 MW and 1 MWh of capacity, has been installed at Fortums Järvenpää biomass fired CHP (combined heat andpower) plant.

Case Study: Utility Scale Project Using DCE Solar's Contour System

A COMPLETELY FLAT SITE with no changes in slope or terrain is rare to find even at only 10 or 20 acres, however grading an entire 150-acre site would quickly raise costs on the project beyond the point of feasibility.

The Atacama Desert, Extreme Conditions for Instrumentation

Due to extreme weather, high solar radiation, high UV index and the salinity of certain areas, the Atacama Desert in Chile presents conditions that contribute to the early degradation of instrumentation, communication and energy systems.

Sollega Case Study: FastRack510 - IKEA 1.125 MW

Ikea, one of the leading retailers of finished goods in the world, has installed a 1.125 MW solar array on their new facility in Renton Washington. It is the latest Ikea in the US to be powered by the sun and the largest roof top install in Washington State.

Venteea Project Shows a Fair Wind for Distribution Network Energy Storage

In addition to the technical lessons learned, the project team expects to draw conclusions regarding the changes necessary to the current regulatory regime that will enable the optimum usage of energy storage in unbundled power systems.

New York's Quixotic Services Designs High-power 'Solar Wall' For Urban Health Plan in the Bronx

Unlike most rooftop systems, the 37kW array has been installed on the side of the building - a "solar wall" that will optimize the facilitys clean energy production and save money for critical community healthcare services.

Tesla Energy Storage Helps Couple Use Almost All of the Energy They Generate From Solar

Devons first Tesla Powerwall reduces amount of electricity Mike and Jan buy from their energy company by 86%

PPE count on Lufft weather sensors for PV Monitoring

The number of metrics measured by the Luffts weather stations in combination with the high accuracy of the sensors gives our customers the ability to forecast short-term and long-term generation capabilities of their site with a high degree of confidence.

Case Study: Solar Cube - Solar Tracking Solution

The client indicated a large number of high quality; 2 axis solar arrays built on rural and farm properties that were starting to fail.

Protecting an Endangered Species and a Solar Energy Project

Valuable Lessons in Co-existence

High Tech High Goes Solar

High Tech High Chula Vista strives to empower its students to ask the big questions and make big changes in the world. Climate change is one of the most pressing issues in our world, making solar energy one of the most effective responses that HTHCV has at its disposal.

With Skilled Volunteers and a High-Performing Kyocera Solar Array, Fallbrook Seventh-day Adventist Church Slashes Energy Costs

The 30kW grid-tie system uses 126 Kyocera solar modules and is currently supplying more power to the grid than the church consumes.

Solar 'Carports' on Multi-storey Car Parks Roofs: First in UK on Exeter City Council Buildings

In September 2015 SunGift Energy completed the UKs first 'solar carports on the top decks of two multi-storey car parks.

Case Study - TrueString Inverters Save $ for Machine Shop

We asked one customer to model cost savings for us. Note that we didnt pay for this, and it was based on a real bid made in 2015.

Case Study: Solar Project Powers Empowerment For The Disabled

Melwood partnered with Standard Solar to build a 413.8 kW rooftop system on its Horticulture Training Center, along with a 517.1 kW carport system (930 kW total), which will provide 95 percent of the centers energy needs.

Records 31 to 45 of 52

First | Previous | Next | Last

Featured Product

LG Solar Unveils NeON R with Enhanced Aesthetics and Energy Savings

LG Solar Unveils NeON R with Enhanced Aesthetics and Energy Savings

The NeON R module features "Back Contact" cell technology delivering an entirely black panel that is aesthetically pleasing and energy efficient. The cell's seamless, surface blends perfectly into nearly all rooftop designs while the module's electrodes are positioned on the rear of the cell. Using LG's N-type cell structure, the panels produce 365W of energy, up to 7.3kWp, compared to 5.8kWp of the p-type cell. The module's new design minimizes LID, thereby delivering a longer lifespan and increased energy output.